Connector for connecting DC power cord. (right angle, 5 / set)Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.LT seal on the control panel.The MITSUBISHI A series PLC is connected to GP, length: 5 m.Adapter for EX module (5 / set)12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function Proface CA3-CFCALL/512MB-01 CA3-CFCALL/512MB-01 7.5 inches, GP installed to the hard panel to provide dust and moisture proof function.Used to connect the 2-Port adapter to GP4000Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.Used in a variety of host and man-machine interface for RS-422 connectionUSB cable to prevent disconnection of the fastening clip (5 / set)Portable GP2000H series models accessories, RS-422 single head cable (3 m) Proface CA3-CFCALL/512MB-01. Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationFor thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors Proface CA3-CFCALL/512MB-01.
Length: 3 meters. For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block CA3-CFCALL/512MB-01 Proface. Used to convert RGB to DVI-ACable for connecting GP3000 to various modulesCOM1 interface with the cable for direct connection to the CPU series PLC AUsed to prevent disconnection CA3-CFCALL/512MB-01 Proface. (1 interface, 5 / set)GP4000 series back mounted model of wateerproof rubber gasket CA3-CFCALL/512MB-01. (1)Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)The man-machine interface directly connected MITSUUBISHI electric PLC QnA series A/ CPU programming port CA3-CFCALL/512MB-01 Proface Proface CA3-CFCALL/512MB-01. USB cable clamp for preventing disconnection of connection (5 / set)