For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)7.5 inches, GP installed to the hard panel to provide dust and moisture proof function CA3-CFCALL/256MB-01 PDF. Touch panel operation for RGB input modules (Master - from: Mini-B)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface12.1 inches, replaced by a host of backlight (1) CA3-CFCALL/256MB-01COM1 interface with the cable for direct connection to the CPU series PLC AConnect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM22GB, for the implementation of the picture save, log and data backup and other data mmanagement operations, such as compression flash memory card CA3-CFCALL/256MB-01 PDF CA3-CFCALL/256MB-01 Manual. 10.4 inches (TFT), the replacement of the host backlight (1).Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable. (5 / set)10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function CA3-CFCALL/256MB-01 PDF. Use external output for the GP3000 series of auxiliary connectors (5 / sets).Adapter for EX module (5 / set)COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface Proface User's Manual. COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionExtension cable for connecting USB (Type-A) interface to front panel.Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceAdapter for EX module (5 / set)Used to convert the USB interface to the serial interface (RS-232C) Proface User's Manual Proface User's Manual CA3-CFCALL/256MB-01 User's Manual. A modem or bar code reader that can be connected to support RS-232C.10.4 inches (TFT), the replacement of the host backlight ((1) CA3-CFCALL/256MB-01 Manual. COM2 terminal adapter for communication through the RS-422/485 connectionCOM1 interface with the cable for direct connection to the CPU series PLC Q