USB cable to prevent disconnection of the fastening clip (5 / set)For 5.7 inch models, for fixing the hooks of the three EX modules.15 inches, replaced by a host of backlight (1) CA3-CFCALL/512MB-01 PDF. COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionCOM1 interface with the cable for direct connection to the CPU series PLC QFor 5.7 inch models, for the 5 CA3-CFCALL/512MB-017 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.COM1 interface with the cable for direct connection to the CPU series PLC AExpansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationCOM 2 interface with the cable, for the conversiion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connectorAdapter for EX module (5 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceTouch panel operation for RGB input modules (Master - from: Mini-B)10 CA3-CFCALL/512MB-01 PDF CA3-CFCALL/512MB-01 PDF CA3-CFCALL/512MB-01 Manual. 4 inches and above, used to connect the power cord (5 / set).5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).For 5.7 inch models, prevent cable loose from the USB cable fastening clip (5 / set) Proface User's Manual. COM2 adapter for converting the COM2 interface to the RS-422 terminal blockThe main controller is connected to the man-machine interface for MPI communication10.4 inches (TFT), the replacement of the host backlight (1).For RGB input USB cable to prevent disconnection (2 / set)A connector that connects the DIO interface for connecting an external I/O device (5 sets) Proface User's Manual. 10.4 inches (TFT), the replacement of the host backlight (1).For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set) CA3-CFCALL/512MB-01 User's Manual. Extended cable for connecting USB (Type-A) (LT) interface Proface User's Manual. 10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function.Used to connect the SIEMENSS S5 PLC series to the host computer interfaceTransmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)