LK Automation Limited
Universal pulse interface driver MR-J3-22KA4 MITSUBISHI MR-J3-22KA4
Brand:
MITSUBISHI
Name: Universal pulse interface driver
Model: MR-J3-22KA4
MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 22.0kw.
Interface type: general pulse interface type.
Power specification: three phase AC400V.
Pulse train and analog input as universal interface.
Can choose the position, speed and torque control mode.
The use of advanced tuning features such as advanced vibration suppression control and adaptive filter,
Greatly improve the performance of the machine.
MR-J3, your partner.
Higher performance, more features, more convenient to use.
Highest performance in the industry.
Speed response frequency up to 2.1kHz.
...More relevant models >>>>
Name: Universal pulse interface driver
Model: MR-J3-22KA4
MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 22.0kw.
Interface type: general pulse interface type.
Power specification: three phase AC400V.
Pulse train and analog input as universal interface.
Can choose the position, speed and torque control mode.
The use of advanced tuning features such as advanced vibration suppression control and adaptive filter,
Greatly improve the performance of the machine.
MR-J3, your partner.
Higher performance, more features, more convenient to use.
Highest performance in the industry.
Speed response frequency up to 2.1kHz.
MR-J2M multi axis servo amplifier drive unit.
Rated output: 0.1kw.
Servo system is used to achieve the following purposes:
1, with a small power command signal to control the power load. Gun control and rudder control is a typical example.
2, in the absence of mechanical connection, the input shaft control is located in the distance of the output shaft, to achieve remote synchronous transmission MITSUBISHI MR-J3-22KA4 MR-J3-22KA4
3, so that the output of the mechanical displacement of the precise tracking of electrical signals, such as records and instructions, etc.. Fiber length: 10 meters.
SSCNET III cables (external standard optical fiber control cabinet).
Joints for CN1A and CN1B. Motor series: low inertia, medium capacity MITSUBISHI MR-J3-22KA4.
Rated output power: 45.0kw.
Rated speed: 1500rpm.
With the brake: without.
Voltage: 400V level.
Shaft end: straight shaft.
The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor MITSUBISHI MR-J3-22KA4.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines). Servo motor series: medium inertia, medium power.
Rated output: 1.2kw.
Rated speed: 1000r/min MR-J3-22KA4 MITSUBISHI.
Electromagnetic brake: with.
Shaft end specification: Standard (straight axis).
Characteristics: medium inertia has two types of low speed and high speed, suitable for different applications MR-J3-22KA4 MITSUBISHI.
IP level: IP67.
Application example:
1, material handling system.
2, industrial robots.
3, X-Y working table.
The protection level of the HF-SP/HF-JP series servo motor is IP67 (except the shaft part).
Motor capacity selection soft (MRZJW3-MOTSZ111E)
Friendly interface design, only in the mechanical description window input constant and operation mode can choose the best servo amplifier,
The servo motor and the regenerative braking options, but also in the selection window in the selection of linear servo motor and direct drive motor MRR-J3-22KA4 MITSUBISHI MR-J3-22KA4.
Characteristic
(1) 10 typical mechanical transmission structure can be used to choose
(2) user defined operating modes (location and speed control)
(3) in the selection process, the feed speed and torquue can be displayed in a graphical format MITSUBISHI MR-J3-22KA4.
(4) the calculation process can be displayed
Can easily calculate the power of the servo motor free software!
Rated output: 0.1kw.
Servo system is used to achieve the following purposes:
1, with a small power command signal to control the power load. Gun control and rudder control is a typical example.
2, in the absence of mechanical connection, the input shaft control is located in the distance of the output shaft, to achieve remote synchronous transmission MITSUBISHI MR-J3-22KA4 MR-J3-22KA4
3, so that the output of the mechanical displacement of the precise tracking of electrical signals, such as records and instructions, etc.. Fiber length: 10 meters.
SSCNET III cables (external standard optical fiber control cabinet).
Joints for CN1A and CN1B. Motor series: low inertia, medium capacity MITSUBISHI MR-J3-22KA4.
Rated output power: 45.0kw.
Rated speed: 1500rpm.
With the brake: without.
Voltage: 400V level.
Shaft end: straight shaft.
The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor MITSUBISHI MR-J3-22KA4.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines). Servo motor series: medium inertia, medium power.
Rated output: 1.2kw.
Rated speed: 1000r/min MR-J3-22KA4 MITSUBISHI.
Electromagnetic brake: with.
Shaft end specification: Standard (straight axis).
Characteristics: medium inertia has two types of low speed and high speed, suitable for different applications MR-J3-22KA4 MITSUBISHI.
IP level: IP67.
Application example:
1, material handling system.
2, industrial robots.
3, X-Y working table.
The protection level of the HF-SP/HF-JP series servo motor is IP67 (except the shaft part).
Motor capacity selection soft (MRZJW3-MOTSZ111E)
Friendly interface design, only in the mechanical description window input constant and operation mode can choose the best servo amplifier,
The servo motor and the regenerative braking options, but also in the selection window in the selection of linear servo motor and direct drive motor MRR-J3-22KA4 MITSUBISHI MR-J3-22KA4.
Characteristic
(1) 10 typical mechanical transmission structure can be used to choose
(2) user defined operating modes (location and speed control)
(3) in the selection process, the feed speed and torquue can be displayed in a graphical format MITSUBISHI MR-J3-22KA4.
(4) the calculation process can be displayed
Can easily calculate the power of the servo motor free software!
...More relevant models >>>>