LK Automation Limited
RD75P2 | MITSUBISHI RD75P2 Positioning module
Brand:
MITSUBISHI
Name: Positioning module
Model: RD75P2
"Transistor output.
Axis of control: 2.
Control unit: mm, inch, degree, pulse.
Location data: 600 data / axis.
Module backup function: the positioning data, module start data saved to the flash ROM (no battery).
Boot time (operation cycle 0.444ms, 1 axes): 0.3ms.
Maximum output pulse: 200000pulse/s.
The maximum distance between servo system: 2m.
External wiring connection mode: 40 pin connector.
Linear interpolation: 2 axes.
Arc interpolation: 2 axes.
Positioning module
Positioning module can be the highest 5Mpulse/s*1 of the high-speed pulse output up to 4 axis control.
A pulse train input servo amplifier, a step motor driver, etc., which can be connected with a transistor (open collector) or a differential driver input interface, is a universal driver module.
The positioning module includes a transistor output type and a differential driver output type 2, which can be selected according to the connection of the drive module.
When selecting the output type of the differential driver, the high speed pulse of the highest 5Mpulse/s can be output and the longest distance connection of the 10m is carried out.
Position control and speed control can be carried out by the positioning module.
In addition to the previous linear interpolation function, arc interpolation function, but also a new spiral line interpolation function,
Can be used for milling and other complex control purposes. "
...More relevant models >>>>
Name: Positioning module
Model: RD75P2
"Transistor output.
Axis of control: 2.
Control unit: mm, inch, degree, pulse.
Location data: 600 data / axis.
Module backup function: the positioning data, module start data saved to the flash ROM (no battery).
Boot time (operation cycle 0.444ms, 1 axes): 0.3ms.
Maximum output pulse: 200000pulse/s.
The maximum distance between servo system: 2m.
External wiring connection mode: 40 pin connector.
Linear interpolation: 2 axes.
Arc interpolation: 2 axes.
Positioning module
Positioning module can be the highest 5Mpulse/s*1 of the high-speed pulse output up to 4 axis control.
A pulse train input servo amplifier, a step motor driver, etc., which can be connected with a transistor (open collector) or a differential driver input interface, is a universal driver module.
The positioning module includes a transistor output type and a differential driver output type 2, which can be selected according to the connection of the drive module.
When selecting the output type of the differential driver, the high speed pulse of the highest 5Mpulse/s can be output and the longest distance connection of the 10m is carried out.
Position control and speed control can be carried out by the positioning module.
In addition to the previous linear interpolation function, arc interpolation function, but also a new spiral line interpolation function,
Can be used for milling and other complex control purposes. "
Safety grade (SIL): SIL 3 (IEC 61508).
Performance level (PL): e PL (13849-1 EN/ISO).
Operation control mode: stored procedures repeated operation.
Program capacity: 160K (security program: 40K).
Program memory: 640K.
Soft element / tag memory: 1710K.
Data memory: 10M.
Integrate security functions into the control system MITSUBISHI RD75P2.
Can be used in the previous iQ-R MELSEC series module as a general control purposes,
Use on the same substrate, it can be used to construct a hybrid system with general control and safety control RD75P2
Moreover, IE Field CC-Link network can be integrated with general communication and secure communication,
Ethernet cable can also be used in secure communication,
No need to use a dedicated cable, etc MITSUBISHI RD75P2. .
In line with the international safety standards for the safety of CPU can be controlled at the same time the general system and safety system.
Available through IE Field CC-Link network,
Connect the safety switch and safety light curtain system used to secure CPU,
System for the construction of a general control and safety control system.
In addition, through the use of intuitive engineering software Works3 GX,
Focus on general control and safety control programming MITSUBISHI RD75P2. "Axis of control: 16.
Program language: motion SFC, special instruction.
Servo program capacity: 32K.
Location points: 6400 (indirect) RD75P2 MITSUBISHI.
Servo amplifier connection mode: SSCNET III /H (1 system).
The motion CPU module is a CPU module which can be used for positioning control, synchronization control, speed / torque control and other advanced motion control RD75P2 MITSUBISHI.
A multi CPU system with programmable controller CPU module and motion CPU module is installed on the same substrate module,
High speed control and high precision motion control can be realized.
High speed data communication between CPU modules RD75P2 MITSUBISHI.
Programmable controller CPU module and motion CPU module with 2 kinds of CPU buffer memory,
One is the storage area of the constant period communication between tthe CPU module and the 0 RD75P2. 222ms cycle,
The other is a storage area that can perform data communication directly at any time.
The storage area of any communication can contribute to the large capacity data transfer between the CPU moodules and the real-time response of the refresh data MITSUBISHI RD75P2.
For example, can be a one-time transfer cam data, such as large capacity data, easy to program. "
Performance level (PL): e PL (13849-1 EN/ISO).
Operation control mode: stored procedures repeated operation.
Program capacity: 160K (security program: 40K).
Program memory: 640K.
Soft element / tag memory: 1710K.
Data memory: 10M.
Integrate security functions into the control system MITSUBISHI RD75P2.
Can be used in the previous iQ-R MELSEC series module as a general control purposes,
Use on the same substrate, it can be used to construct a hybrid system with general control and safety control RD75P2
Moreover, IE Field CC-Link network can be integrated with general communication and secure communication,
Ethernet cable can also be used in secure communication,
No need to use a dedicated cable, etc MITSUBISHI RD75P2. .
In line with the international safety standards for the safety of CPU can be controlled at the same time the general system and safety system.
Available through IE Field CC-Link network,
Connect the safety switch and safety light curtain system used to secure CPU,
System for the construction of a general control and safety control system.
In addition, through the use of intuitive engineering software Works3 GX,
Focus on general control and safety control programming MITSUBISHI RD75P2. "Axis of control: 16.
Program language: motion SFC, special instruction.
Servo program capacity: 32K.
Location points: 6400 (indirect) RD75P2 MITSUBISHI.
Servo amplifier connection mode: SSCNET III /H (1 system).
The motion CPU module is a CPU module which can be used for positioning control, synchronization control, speed / torque control and other advanced motion control RD75P2 MITSUBISHI.
A multi CPU system with programmable controller CPU module and motion CPU module is installed on the same substrate module,
High speed control and high precision motion control can be realized.
High speed data communication between CPU modules RD75P2 MITSUBISHI.
Programmable controller CPU module and motion CPU module with 2 kinds of CPU buffer memory,
One is the storage area of the constant period communication between tthe CPU module and the 0 RD75P2. 222ms cycle,
The other is a storage area that can perform data communication directly at any time.
The storage area of any communication can contribute to the large capacity data transfer between the CPU moodules and the real-time response of the refresh data MITSUBISHI RD75P2.
For example, can be a one-time transfer cam data, such as large capacity data, easy to program. "
...More relevant models >>>>