Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output. Up to 7 EX modules can be connected.7.4 inches or larger, FLEX NETWORK GLC2300 connector (5 groups)When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)B/B+/C FLEX NETWORK Type connector (5)Portable GP2000H series models accessories, RS-422 single head cable (3 m) Proface CA1-EXCBL/D25-01 CA1-EXCBL/D25-01 The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.(serial communication terminal adapter is included in the product package)For RGB input USB cable to prevent disconnection (2 / set)COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)One end is a loose wire, which is used to carry out RS-485 connection between the host and LT Proface CA1-EXCBL/D25-01. Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM27.4 inches, replace the backlight (1 / set)Used to convert RGB to DVI-AConnector for connecting DC power cord Proface CA1-EXCBL/D25-01. (linear, 5 / set)Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters. To prevent the connection of disconnected USB cable fastening clips (Mini-B USB, 1 interface, 5 / set)12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function.Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Some types of PLC are not connected. Length: 5 meters.COM2 inteerface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interface10 CA1-EXCBL/D25-01. 4 inches (STN), the replacement of the host backlight (2 / set).10.4 inches (TFT), thin film for surface protection of man-machine intterface from fingerprints, water droplets, dust and oil pollution (5 / set) CA1-EXCBL/D25-01. A veneer, for the GP4000 series back loading models of full flush (white, 1)