Apply to GLC-2600/25007.4 inches or larger, FLEX NETWORK GLC2300 connector (5 groups)COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters Proface CA1-RCVLRG-01. Used to install the man-machine interface to the fixed panel CA1-RCVLRG-01 (4 / set)12 way 4 digital signals into analog signals and output resultsEngineering documents created by the LT interface to download images and logic programming software through the USB interface.5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)The main controller is connected to the man-machine interface for MPI communicationDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceUsed for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave jointDurable cable for connecting GP3000H adapter and GP3000H Proface CA1-RCVLRG-01. Interface module for the simultaneous use of A/QnA/FX series external controllerDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface10 Proface CA1-RCVLRG-01. 4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) CA1-RCVLRG-01 Proface. SD memory card (4GB, MLC, CLASS4).For the DVI input to GP3000Replaceable anti fouling film for protecting screen protective film (5 sheets / cover) CA1-RCVLRG-01 Proface. Disposable battery (1 blocks) for backing up clock data.Used to connect the SIEMENS S5 PLC series to the host computer interfaceThe man-machinne interface directly connected MITSUBISHI electric PLC Q series CPU programming port CA1-RCVLRG-01 Proface CA1-RCVLRG-01. COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionCable for connectiing GP3000 to various modulesThe host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication Proface CA1-RCVLRG-01.