Application: extended input module with input power transfer cable.Cable flat cable;
Connector with 20 pin installed at both ends of the fuse.
Length 3M. Needle number: 40.
Specification: loose wire connector, 5 sets (0.3mm 2). Max input / output points: 10 points.
Supply voltage: 100 - 240VAC.
Input points: 6 points MITSUBISHI FX5-485ADP.
Output points: 4 points.
Output type: relay.
Power consumption (W): 19 FX5-485ADP
Weight (kg):0.22.
Size (WxHxD) mm:60x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain MITSUBISHI FX5-485ADP.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication MITSUBISHI FX5-485ADP. Input and output points: 48 points.
DC power supply: DC24V.
Input points: 24 points.
Output points: 24 points.
Output form: transistor output (source).
Weight: 0.85kg.
Input signal voltage: DC24V.
FX2N series expansion unit
Expansion unit is an input and output expansion device with a built-in power supply FX5-485ADP MITSUBISHI.
As with the basic unit, the extension unit can be connected to a variety of input and output and special extension equipment FX5-485ADP MITSUBISHI.
Can connect to FX3GA/FX3G, FX3GE and FX3U.
AC power model, the built-in maximum DC24V 250mA/460mA supply power.
Because all models of FX series are built in high speed counter,
So the high speed control can be realized by the simple procedure FX5-485ADP MITSUBISHI.
The input of the basic unit is built in the anti jitter filter,
One part as digital filter,
Sensitivity adjustment unit can reach 1ms FX5-485ADP.
Using high speed counter automatically adjusted to the minimum value.
Through the high cost of the built-in positioning function and the expansion function to increase the number of control axis MITSUBISHI FX5-485ADP.
Extended function expansion board and special adapter,
Data links and communication with external serial devices.