Output: SPDT.
Lighting: LED (with built-in reduced-voltage lighting function).
Operating voltage: 100/110 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white.
Item: Alternate operation (Self-holding).
Separate Construction with.
Cylindrical 16-dia . Body.
Miniature design of 28 E6A2-CWZ3E 500P/R 0.5M. 5 mm, the smallest class in the industry.
Detachable Switch
E6A2-CWZ3E 500P/R 0.5M
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Item: Operation indicator (LED) *1; High-sensitivity 10°.
Actuator: Roller lever, direct-wired connector; 2 conductors; DC E6A2-CWZ3E 500P/R 0.5M.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches .
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting E6A2-CWZ3E 500P/R 0.5M.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models. Lock method: Solenoid lock.
Conduit size: G1/2.
Voltage for solenoid: 24 VDC.
Without indicator 2NC+ 1NC (Slow-action).
Release Protective Cover Locks Using.
Controller Signals or Pushbutton.
Switches after the Cutting Tool Stops.
Moving Due to Inertia.
A mechanical lock is applied automatically when the Operation.
Key is inserted. A high level of safety is achieved using a,
mechanism where the lock is only released when voltage is,
applied to the solenoid.
Conforms to EN (TÜV) standards corresponding to the CE marking.
Certified by UL, CSA and CCC standards.
The Switch contact is opened by a direct opening mechanism,
(NC contacts only) when the protective cover is opened.
Direct opening mechanism that is EN-certified is indicated by,
on the Switch.
Auxiliary release key ensures easy maintenance and unlocks the,
door in the case of a power failure.
Tough aluminum die-cast body iincorporating a switch box with,
degree of protection satisfying IP67, UL, and CSA TYPE6P, 13 E6A2-CWZ3E 500P/R 0.5M.
Equipped with a horizontal and vertical conduit opening.
Models incorporating easy-to-see indicators for monitoring and,
those using an adjustable Operation Key fforr a swinging door are available E6A2-CWZ3E 500P/R 0.5M.
The mounting direction of the head can be changed,
to allow the Operation Key to be inserted from four directions.
E6A2-CWZ3E 500P/R 0.5M Operation manual/Instructions/Model selection sample download link:
/searchDownload.html?Search=E6A2-CWZ3E 500P/R 0.5M&select=5