26 point line conversion adapter 1 line type 16 input CC-Link unit installation special connection conversion adapterPower: 1.5kw.
Voltage: 200V.
Purpose: high frequency braking resistor.
The braking ability provided by the braking capacity is larger than that provided by the external braking resistor .
Can also be connected without built-in brake transistor inverter RY41NT2H.
Three types of discharge resistors are available RY41NT2H
Please select according to the required braking torque. Master station module supporting AnyWireASLINK system.
Connecting sensor and programmable controller.
Free configuration of sensors, control of 512 points of the input and output.
The AnyWireASLINK transmission line (2 lines) can be used for communication to supply power for the sensor, and the sensor can also be conveniently added RY41NT2H.
Can through the project software GXWorks2 batch management sensor shedding detection and from the station module settings, etc.,
Substantial savings in time and cost.Type: MR-J series.
Rated output: 0.75KW.
Applicable motor series: HA-FF, HA-SE.
Voltage: three phase AC220V RY41NT2H.
It is very helpful to improve the stability of the low speed control of the servo motor .
But there is no direct effect to improve the accuracy of position control.
There are, of course, software compensation that is similar to pitch compensation,
Can improve the physical resolution of the single lap, so as to improve the accuracy of positioning control.
This can be effectively used in the use of the robot control of the indexing table.
It is also because of the application of splicing technology,
The rotary encoder will be more widely used in the high precision servo control in the harsh environment.
The use of rotary encoder with 224/ in the servo motor has been used in the servo motor.
Encoder serial communication system, the communication frequency can only be limited to 10M. Motor series: low inertia, medium power.
Rated output power: 22.0kw.
Rated speed: 1500r/min.
Whether to take the brake: No.
Shaft end: Standard (straight).
Voltage: 400V type.
Protection level: IP65 (IP67).
Features: low inertia from low speed to high speed, three modes can be selected, suitable for different application range. As a standard port, 330KW or greater power is suiitable for flange (type) installation and support foot mounting RY41NT2H.
Application example: injection molding machine, semiconductor manufacturing equipment, large conveyor machinery.
High resolution encoder 131072p/rev (17 bit).
The encoder with high reesoolution ensures excellent performance and stability at low speed RY41NT2H.
All motor dimensions are the same as before and all are compatible with the wiring.
RY41NT2H Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=RY41NT2H&select=5