Product name: NA-type CPU Units with 20 I/O Points (Built-inanalog).
Specifications: Power Supply, 24 VDC; Inputs,
12(Built-inanalog inputs: 2; Outputs, 8(Built-inanalog outputs: 1;
Output type: Transistor (sourcing).
Program capacity: 8K steps.
memory Data capacity: 8K words CV500-CPU01-EV1.
External powersupply(24 VDC): --.
Current consumpttion: 5 V, 0.23A; 24 V，0.09A.
Standards: UC1, N, L, CE.
The CP1E Programmable Controller: Economical, Easy to use, and Efficient.
The E@@(S)-type Basic CPU Units provide cost,
performance and easy application with only basic functionality CV500-CPU01-EV1.
The N@@(S@) and NA-types Application CPU Units,
support Programmable Terminal connection, position control,
and inverter connection. I/O Link of 32 input bits and 32 output bits
Model : CV500-CPU01-EV1 CV500-CPU01-EV1.
SFC / Ladder 512 (with RAM30K words, the top internal link).Model : CV1000-CPU01-V1.
SFC / Ladder 1, 024 points (with RAM62K words, the top internal link).Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Thermocouple Input Units OMRON CV500-CPU01-EV1.
points Input: 4 inputs.
Signal range selection:
Set separately for each input.
I/O type: B, E, J, K, L, N, R, S,
T, U, WRe5-26, PLII, ±100 mV.
Conversion speed: 20 ms/4 inputs,
10 ms/2 inputs.
Externa connection: Removable erminal block OMRON CV500-CPU01-EV1.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.12A; 26V, 0.08A.
Standards: UC1, N, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value OMRON CV500-CPU01-EV1.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring. <
systems can be constructed,
or the Units can be used together with LCBs/LCUs,
to construct complete process control systems CV500-CPU01-EV1.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.