MITSUBISHI
Reader module
A1SD32ID1

AnS, QnAS bus connection, the reader to write program 1 channel connection. Input status and input information input from the input interface, CPU will be stored in the working data memory or in the input image register.

MITSUBISHI
Reader module
A1SD32ID2

AnS, QnAS bus connection, the reader to write program 2 channel connection. Input status and input information input from the input interface, CPU will be stored in the working data memory or in the input image register.

MITSUBISHI
Reader module
A1SD35ID1

Reader writer 1 channel connection, AnSCPU/QnASCPU. PLC is the use of " sequential scanning, and constantly circulating " way to work.

MITSUBISHI
Reader module
A1SD35ID2

Reader writer 2 channel connection, AnSCPU/QnASCPU. PLC is the use of " sequential scanning, and constantly circulating " way to work.

MITSUBISHI
Intelligent communication module
A1SD51S

A1SD51S is an intelligent communication module used in ANS series, Can use the AD51H-BASIC language to make online or offline programming on the universal terminal or computer, Multitasking can also be performed with up to two programs at high speed. PLC is the use of " sequential scanning, and constantly circulating " way to work.

MITSUBISHI
High speed interrupt module
A1SI61

A1SI61 is designed to control the application of mechanical devices that require high speed response time. A1SI61 temporarily stop running in order to generate an interrupt signal when the program is running, And according to the interrupt vector to execute the corresponding interrupt handler.

MITSUBISHI
Main communication module
A1SJ51T64

Up to controlled I/O points: 8 point I/O combination module, up to 128 points. Use any I/O module, up to 64 points.

MITSUBISHI
CC-Link module
A1SJ61BT11

Three remote components can be connected to the CC-LINK system. Remote I/O: refers to the field components that require only ON/OFF control, Such as digital I/O or pneumatic valve, etc.

MITSUBISHI
CC-Link module
A1SJ61QBT11

CC-Link master / slave station. PLC is the use of " sequential scanning, and constantly circulating " way to work.

MITSUBISHI
Modular
A1SJ71AS92

The main unit of the AS-i system The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it, Lag time, this is the time constant of the input circuit, The time constant of the output circuit, the arrangement of the user statement and the use of the instruction, The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on. This phenomenon is called the I/O delay time effect.

MITSUBISHI
Modular
A1SJ71B62-S3

Signal transmission device B/NET interface device for power distribution control equipment The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it, Lag time, this is the time constant of the input circuit, The time constant of the output circuit, the arrangement of the user statement and the use of the instruction, The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on. This phenomenon is called the I/O delay time effect.

MITSUBISHI
Modem module
A1SJ71CMO-S3

Using a modem middle modular connector unit faces to transmit data transmission speed: 0.3-14.4kbps.