LK Automation Limited
ZX-TDS01T Smart Sensors OMRON ZX-TDS01T
Brand:
OMRON
Name: Smart Sensors
Model: ZX-TDS01T
Size: 6 dia.
Type: Short type.
Sensing distance: 1 mm.
Resolution (See note.): 0.1 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website.
...More relevant models >>>>
Name: Smart Sensors
Model: ZX-TDS01T
Size: 6 dia.
Type: Short type.
Sensing distance: 1 mm.
Resolution (See note.): 0.1 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website.
Fitting materials: Stainless steel(SUS304).
Count: 1 .
Accessories: Description, Holder/bracket, Shaft (brace),
Bolt with hexagonal hole, Nut, Phillips screw, Slotted/Phillips screws;
Material, PBT (polybutylene tereph thalate), Stainless steel (SUS304),
Stainless steel (SUSXM7), Stainless steel (SUS304),
Stainless steel (SUSXM7), Stainless steel (SUS304);
Count, 1, 1, 1, 1, 1, 2 OMRON ZX-TDS01T ZX-TDS01T
Applicable sensor (mounting pitch on sensor side): E3Z (25.4),
E3S-R6@/R8@ (20) , E39-R3.
Page: Dimensions, 14. Size: M30, Non-shielded.
Sensing distance: 30.0 mm.
Connection: Pre-wired.
Body material: Brass.
Thread length (overall length): 66 (86).
Output configuration: NPN.
Operation mode NC.
Safe Mounting with Greater OMRON ZX-TDS01T.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Remarks: Attached to each Sensor.
Now, more advanced with a new mutual OMRON ZX-TDS01T.
interference prevention function.
Long-distance detection of up to 6,000 mm supports a wide vari,
ety of applications.
The Sensor is not affected by the color or material of objects ZX-TDS01T OMRON.
A setting plug with temperature compensation makes it easy to,
set the sensing range.
Mutual interference prevention.
Sensor type: Diffuse-reflective.
Sensing distance: 1 m ZX-TDS01T OMRON.
Connection method: M12 connector.
Model: NPN output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications.
Non-stop detection ZX-TDS01T OMRON.
High quality and reliability.
High EMC protection.
High light immunity.
Robust and waterproof housing ZX-TDS01T. Appearance: Shielded, M30.
Sensing distance: 10 mm.
Output configuration: DC 2-wire (1)-(4) pin arrangement.
Operation mode: NO.
Spatter-resistant Fluororesin,
coated Proximity Sensor.
Superior sspatter resistance OMRON ZX-TDS01T.
Long Sensing-distance Models added for sensing,
distances up to 15 mm.
Pre-wired Smartclick Connector Models are also available.
Count: 1 .
Accessories: Description, Holder/bracket, Shaft (brace),
Bolt with hexagonal hole, Nut, Phillips screw, Slotted/Phillips screws;
Material, PBT (polybutylene tereph thalate), Stainless steel (SUS304),
Stainless steel (SUSXM7), Stainless steel (SUS304),
Stainless steel (SUSXM7), Stainless steel (SUS304);
Count, 1, 1, 1, 1, 1, 2 OMRON ZX-TDS01T ZX-TDS01T
Applicable sensor (mounting pitch on sensor side): E3Z (25.4),
E3S-R6@/R8@ (20) , E39-R3.
Page: Dimensions, 14. Size: M30, Non-shielded.
Sensing distance: 30.0 mm.
Connection: Pre-wired.
Body material: Brass.
Thread length (overall length): 66 (86).
Output configuration: NPN.
Operation mode NC.
Safe Mounting with Greater OMRON ZX-TDS01T.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Remarks: Attached to each Sensor.
Now, more advanced with a new mutual OMRON ZX-TDS01T.
interference prevention function.
Long-distance detection of up to 6,000 mm supports a wide vari,
ety of applications.
The Sensor is not affected by the color or material of objects ZX-TDS01T OMRON.
A setting plug with temperature compensation makes it easy to,
set the sensing range.
Mutual interference prevention.
Sensor type: Diffuse-reflective.
Sensing distance: 1 m ZX-TDS01T OMRON.
Connection method: M12 connector.
Model: NPN output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications.
Non-stop detection ZX-TDS01T OMRON.
High quality and reliability.
High EMC protection.
High light immunity.
Robust and waterproof housing ZX-TDS01T. Appearance: Shielded, M30.
Sensing distance: 10 mm.
Output configuration: DC 2-wire (1)-(4) pin arrangement.
Operation mode: NO.
Spatter-resistant Fluororesin,
coated Proximity Sensor.
Superior sspatter resistance OMRON ZX-TDS01T.
Long Sensing-distance Models added for sensing,
distances up to 15 mm.
Pre-wired Smartclick Connector Models are also available.
...More relevant models >>>>