LK Automation Limited
ZX-SAM11 OMRON ZX-SAM11
Brand:
OMRON
Name: Intelligent package for counting
Model: ZX-SAM11
To achieve a variety of workpiece count.
Highly different, there are vacancies for the workpiece count.
The shape is not stable, may be dumped by the count of the workpiece.
...More relevant models >>>>
Name: Intelligent package for counting
Model: ZX-SAM11
To achieve a variety of workpiece count.
Highly different, there are vacancies for the workpiece count.
The shape is not stable, may be dumped by the count of the workpiece.
Field of view: Wide View (Long-distance).
Number of pixels: 760,000 pixels.
Monochrome: PNP.
Field of view/Installation distance: Refer to figure 7 on p.20.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller OMRON ZX-SAM11 ZX-SAM11
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series. Sensing method: Grooved-type.
Sensing distance : 30 mm .
A Grooved-type Sensor That Doesn''t
Require Optical Axes AlignmentSensing method: Diffuse reflective.
Appearance: Vertical OMRON ZX-SAM11.
Connection method: Pre-wired .
Sensing distance: 30 to 50 mm.
Model: PNP Open collector output type .
Both Red-light Models and Green,
light Models to Detect a Wide Variety,
of Colors. The ultra small size, high performance and rich models.
5.5mm ultra small built-in amplifier.
Maximum detection distance 2.5mm. Workpiece shaking can also be stable detection.
Response frequency 1kHz OMRON ZX-SAM11.
Low consumption current.
Category: DC 3 wire type.
Shape: non shield.
Detection surface: above.
Detection range: 1.6mm.
Output form: PNP.
Action mode: NO. Free change detection direction.
Detection direction can be according to the front, side (up and down, around 90 units) change.
Can be similar to the feeling of a limit switch installation.
Type: AC type.
Shape: shield.
Detection range: 15mm.
Action mode: NO/NC (toggle). Size: M12 (Brass); Double; Shielded (See note 2.).
Sensing distance: 16 mm.
Connecting method (See note 1.): M12 Connector.
Body length: Long.
Output configuration: PNP.
Operation mode NO.
A new generation in global applications. Appearance: Sttandard ZX-SAM11.
Sensing method: Through-beam type (with slot).
Cable length: 2 m.
Sensing distance: 5 mm (slot width).
configuration Output: Dark-ON.
Indicator mode: Incident light.
Model: PNP output.
Slim, Compact Photomicrosensor.
that iis still easy to use ZX-SAM11.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC.
Number of pixels: 760,000 pixels.
Monochrome: PNP.
Field of view/Installation distance: Refer to figure 7 on p.20.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller OMRON ZX-SAM11 ZX-SAM11
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series. Sensing method: Grooved-type.
Sensing distance : 30 mm .
A Grooved-type Sensor That Doesn''t
Require Optical Axes AlignmentSensing method: Diffuse reflective.
Appearance: Vertical OMRON ZX-SAM11.
Connection method: Pre-wired .
Sensing distance: 30 to 50 mm.
Model: PNP Open collector output type .
Both Red-light Models and Green,
light Models to Detect a Wide Variety,
of Colors. The ultra small size, high performance and rich models.
5.5mm ultra small built-in amplifier.
Maximum detection distance 2.5mm. Workpiece shaking can also be stable detection.
Response frequency 1kHz OMRON ZX-SAM11.
Low consumption current.
Category: DC 3 wire type.
Shape: non shield.
Detection surface: above.
Detection range: 1.6mm.
Output form: PNP.
Action mode: NO. Free change detection direction.
Detection direction can be according to the front, side (up and down, around 90 units) change.
Can be similar to the feeling of a limit switch installation.
Type: AC type.
Shape: shield.
Detection range: 15mm.
Action mode: NO/NC (toggle). Size: M12 (Brass); Double; Shielded (See note 2.).
Sensing distance: 16 mm.
Connecting method (See note 1.): M12 Connector.
Body length: Long.
Output configuration: PNP.
Operation mode NO.
A new generation in global applications. Appearance: Sttandard ZX-SAM11.
Sensing method: Through-beam type (with slot).
Cable length: 2 m.
Sensing distance: 5 mm (slot width).
configuration Output: Dark-ON.
Indicator mode: Incident light.
Model: PNP output.
Slim, Compact Photomicrosensor.
that iis still easy to use ZX-SAM11.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC.
...More relevant models >>>>