LK Automation Limited
ZJ-FW013AC Static eliminator (regional fan type) OMRON ZJ-FW013AC
Brand:
OMRON
Name: Static eliminator (regional fan type)
Model: ZJ-FW013AC
AC adapter: incidental.
Body size: 130mm.
Slim and lightweight, optional 3 models,
Play excellent setting.
Narrow operating table and high can also be a simple setting.
Thin 6cm quality 1kg* slim, lightweight body. (ZJ-FW029)
...More relevant models >>>>
Name: Static eliminator (regional fan type)
Model: ZJ-FW013AC
AC adapter: incidental.
Body size: 130mm.
Slim and lightweight, optional 3 models,
Play excellent setting.
Narrow operating table and high can also be a simple setting.
Thin 6cm quality 1kg* slim, lightweight body. (ZJ-FW029)
No. of cable cores: 4.
Cable connection direction: Right-angle.
Cable length L: 1 m.
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one touch OMRON ZJ-FW013AC.
Ideal for a wide variety of FA and OA applications.
Connectors on both cable ends require no harness work ZJ-FW013AC
Some new M8 models with 3 or 5 poles. Cable length L: A, 20.0 m; B, 19.75 m.
Connect Connector-Terminal,
Block Conversion Units (XW2@) to,
I/O Units for Programmable,
Controllers with one touch. Static voltage relay.
K2VR-S/K2VA-S type, high action reliability disk with static type UVR/OVR OMRON ZJ-FW013AC.
Accurate work through high reliability semiconductor circuits.
Type K2VU-S1 is the output contact, but will be closed when the voltage is not enough,
Therefore, the locking time sequence circuit of the circuit breaker is not required.
Within the hidden from the start to the 2S timer, can easily adjust the time.
The control power of the relay is not needed, which avoids the trouble of wiring OMRON ZJ-FW013AC.
Power supply voltage: 100 to 240 VAC.
Output: Relay.
Timer function: No.
Features: Single-function with two inputs/one output (AND/OR operation).
Offers High-speed Input Response of,
0.1 ms and Equipped with Built-in Timer,
High-speed response of 0 ZJ-FW013AC OMRON. 1 ms.
Ideal as a two-input Controller.
Lineup includes the S3D2-BK with flip-flop functions convenient for,
level control, the S3D2-AKD/CKD/CCD with 24-V power supply, and,
the S3D2-DK/EK with one input/output OFF-delay (two circuits),
useful for load control and lamp display,
Power source for the Sensor can be supplied up to 200 mA ZJ-FW013AC OMRON.
Ultra-slim body with 30-mm width.
Multi-function model equipped with tiimer functions also available ZJ-FW013AC OMRON ZJ-FW013AC. Model: PL (back-mounting), page 26, PCB terminals.
Approx: 10.6 g.
Number of pins: 8 pins.
A Wide Variety of Square and,
Round Sockets in Front-mounting,
and Back-mounting Modelss,
Models available with finger protection OMRON ZJ-FW013AC.
Hold-down Clips and Socket Bridges for PYF Sockets,
are also available.
New screwless models available.
Cable connection direction: Right-angle.
Cable length L: 1 m.
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one touch OMRON ZJ-FW013AC.
Ideal for a wide variety of FA and OA applications.
Connectors on both cable ends require no harness work ZJ-FW013AC
Some new M8 models with 3 or 5 poles. Cable length L: A, 20.0 m; B, 19.75 m.
Connect Connector-Terminal,
Block Conversion Units (XW2@) to,
I/O Units for Programmable,
Controllers with one touch. Static voltage relay.
K2VR-S/K2VA-S type, high action reliability disk with static type UVR/OVR OMRON ZJ-FW013AC.
Accurate work through high reliability semiconductor circuits.
Type K2VU-S1 is the output contact, but will be closed when the voltage is not enough,
Therefore, the locking time sequence circuit of the circuit breaker is not required.
Within the hidden from the start to the 2S timer, can easily adjust the time.
The control power of the relay is not needed, which avoids the trouble of wiring OMRON ZJ-FW013AC.
Power supply voltage: 100 to 240 VAC.
Output: Relay.
Timer function: No.
Features: Single-function with two inputs/one output (AND/OR operation).
Offers High-speed Input Response of,
0.1 ms and Equipped with Built-in Timer,
High-speed response of 0 ZJ-FW013AC OMRON. 1 ms.
Ideal as a two-input Controller.
Lineup includes the S3D2-BK with flip-flop functions convenient for,
level control, the S3D2-AKD/CKD/CCD with 24-V power supply, and,
the S3D2-DK/EK with one input/output OFF-delay (two circuits),
useful for load control and lamp display,
Power source for the Sensor can be supplied up to 200 mA ZJ-FW013AC OMRON.
Ultra-slim body with 30-mm width.
Multi-function model equipped with tiimer functions also available ZJ-FW013AC OMRON ZJ-FW013AC. Model: PL (back-mounting), page 26, PCB terminals.
Approx: 10.6 g.
Number of pins: 8 pins.
A Wide Variety of Square and,
Round Sockets in Front-mounting,
and Back-mounting Modelss,
Models available with finger protection OMRON ZJ-FW013AC.
Hold-down Clips and Socket Bridges for PYF Sockets,
are also available.
New screwless models available.
...More relevant models >>>>