LK Automation Limited
WLCA2-141LD3-N OMRON Two-circuit Limit Switch/Long-life Two-circuit Limit Switch
Brand:
OMRON
Name: Two-circuit Limit Switch/Long-life Two-circuit Limit Switch
Model: WLCA2-141LD3-N
Actuator: Roller lever: R38.
Wiring specification: NO wiring.
Item: Molded terminals, -141 models; Basic.
Pretravel (PT): 15±5°.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models.
...More relevant models >>>>
Name: Two-circuit Limit Switch/Long-life Two-circuit Limit Switch
Model: WLCA2-141LD3-N
Actuator: Roller lever: R38.
Wiring specification: NO wiring.
Item: Molded terminals, -141 models; Basic.
Pretravel (PT): 15±5°.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models.
Category: snap in type (pre installed).
Character height: decimal: 4.8mm, sixteen hex: 3.2mm.
Terminal: welding terminal.
Terminal color: black.
Output code number: 19 (decimal code, with parts to increase the provisions).
Locked in series.
Character height 4.8 or 3.2mm to make the display easy to view WLCA2-141LD3-N OMRON.
Installing the card into the installation makes it easy to install WLCA2-141LD3-N
This series includes all lock type to prevent accidental operation. Type: Welding / wire type, M3 screw mounting.
Drive rod: needle shaped button type.
Terminal specification: welding.
Contact specifications: 1c.
The minimum size of the long stroke type can be reliably switch
The body part size is 78% of the previous generation product, which is beneficial to the miniaturization of the equipment WLCA2-141LD3-N OMRON.
No swing bars are also used for easy long stroke specifications (OT reference value: 1.4mm).
Without harmful substances to the environment, the lead type has also been lead-free. Type: rectangle.
Screen mode: level 2.
Output: SPDT.
Power supply voltage: DC24V.
Contact type: standard load (AC250V, 3A; DC30V, 3A) WLCA2-141LD3-N OMRON.
Operation: instantaneous action (auto reset).
Color: yellow.
Operating under the color: green.
In the touch and the ability to protect than OMRON''s previous models have improved.
The micro volume design of 23mm is realized.
Micro design and unique combination of soft sensing.
LED has five colors (red, yellow, green, white, and blue).
Built in basic switch improves touch.
Built in basic switches in the previous model based on the OMRON to improve the protection.
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient. Application: General applications for purified water, For 3-pole electrode.
Separate Electrode Holders for Water.
Supply and Drainage Control in Buildings.
Small, Lightweight Electrodde Holders for,
Use as Built-in Components WLCA2-141LD3-N.
The PS-@S(R) are separate Electrode Holders that allow the,
Electrodes to be withdrawn easily for inspection.
The PS-@S(R) come in 3, 4, or 5 pole models for supply and,
drainage of tapp water in buildings WLCA2-141LD3-N.
PS-31 is a small and light-weight Electrode Holder that is,
suitable for installation in limited space and built-in components.
Character height: decimal: 4.8mm, sixteen hex: 3.2mm.
Terminal: welding terminal.
Terminal color: black.
Output code number: 19 (decimal code, with parts to increase the provisions).
Locked in series.
Character height 4.8 or 3.2mm to make the display easy to view WLCA2-141LD3-N OMRON.
Installing the card into the installation makes it easy to install WLCA2-141LD3-N
This series includes all lock type to prevent accidental operation. Type: Welding / wire type, M3 screw mounting.
Drive rod: needle shaped button type.
Terminal specification: welding.
Contact specifications: 1c.
The minimum size of the long stroke type can be reliably switch
The body part size is 78% of the previous generation product, which is beneficial to the miniaturization of the equipment WLCA2-141LD3-N OMRON.
No swing bars are also used for easy long stroke specifications (OT reference value: 1.4mm).
Without harmful substances to the environment, the lead type has also been lead-free. Type: rectangle.
Screen mode: level 2.
Output: SPDT.
Power supply voltage: DC24V.
Contact type: standard load (AC250V, 3A; DC30V, 3A) WLCA2-141LD3-N OMRON.
Operation: instantaneous action (auto reset).
Color: yellow.
Operating under the color: green.
In the touch and the ability to protect than OMRON''s previous models have improved.
The micro volume design of 23mm is realized.
Micro design and unique combination of soft sensing.
LED has five colors (red, yellow, green, white, and blue).
Built in basic switch improves touch.
Built in basic switches in the previous model based on the OMRON to improve the protection.
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient. Application: General applications for purified water, For 3-pole electrode.
Separate Electrode Holders for Water.
Supply and Drainage Control in Buildings.
Small, Lightweight Electrodde Holders for,
Use as Built-in Components WLCA2-141LD3-N.
The PS-@S(R) are separate Electrode Holders that allow the,
Electrodes to be withdrawn easily for inspection.
The PS-@S(R) come in 3, 4, or 5 pole models for supply and,
drainage of tapp water in buildings WLCA2-141LD3-N.
PS-31 is a small and light-weight Electrode Holder that is,
suitable for installation in limited space and built-in components.
...More relevant models >>>>