LK Automation Limited
ST400-WP01 Proface Waterproof rubber gasket
Brand:
Proface
Name: Waterproof rubber gasket
Model: ST400-WP01
3.8 inches, GP installed to the hard panel to provide dust and moisture proof function.
...More relevant models >>>>
Name: Waterproof rubber gasket
Model: ST400-WP01
3.8 inches, GP installed to the hard panel to provide dust and moisture proof function.
For RGB input USB cable to prevent disconnection (2 / set)For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces) ST400-WP01 Proface. For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters ST400-WP01The three color tower lamp installed on the fixed panel is connected with the human machine interface through the USB interface.Standard cable for connecting GP3000H adapter and GP3000H.
Length: 10 meters. Used to convert RGB to DVI-AUsed to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block ST400-WP01 Proface. The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port.The PC adapter for PCMCIA slot read CF card required.SD memory card (4GB, MLC, CLASS4).Apply to GLC-2600/2500A1/A2/B+ DIO Type connector (compression type) (5 / set)Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine ST400-WP01 Proface. USB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set).Portable GP2000H series models accessories, RS-232 single head cable (3 m).7.0/7.5 inch screen protective cover (1 pieces)10.4 inches and above, used to connect the power cord (5 / set).Use external output for the GP3000 series of auxiliary connectors (5 / sets).Data transmission cable between host and LT series. Length: 5 meters.Extension cable for connecting USB (Mini-B) interface to ffront panel ST400-WP01. Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationAUX connector for external output (5 / set).128MB, for the implementation of the picture save, log and data bacckup and other data management operations, such as compression flash memory card ST400-WP01. 13 pin input connectors for HTB and 16 pin output connectors. (1 / set)
Length: 10 meters. Used to convert RGB to DVI-AUsed to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block ST400-WP01 Proface. The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port.The PC adapter for PCMCIA slot read CF card required.SD memory card (4GB, MLC, CLASS4).Apply to GLC-2600/2500A1/A2/B+ DIO Type connector (compression type) (5 / set)Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine ST400-WP01 Proface. USB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set).Portable GP2000H series models accessories, RS-232 single head cable (3 m).7.0/7.5 inch screen protective cover (1 pieces)10.4 inches and above, used to connect the power cord (5 / set).Use external output for the GP3000 series of auxiliary connectors (5 / sets).Data transmission cable between host and LT series. Length: 5 meters.Extension cable for connecting USB (Mini-B) interface to ffront panel ST400-WP01. Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationAUX connector for external output (5 / set).128MB, for the implementation of the picture save, log and data bacckup and other data management operations, such as compression flash memory card ST400-WP01. 13 pin input connectors for HTB and 16 pin output connectors. (1 / set)
...More relevant models >>>>
Related download