Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 3 meters. 15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joints C and D different.Connector for connecting DC power cord (5)LT seal on the control panel Proface GP000-IS11-O. 10.4 inches or larger, when installed to provide the function of dust and moistureThe module is used for mounting on the back board of the GLC2000 series host computer GP000-IS11-O Then you can install the GP77R series or GLC100 series of medium size expansion module in the module on the outward side.Converting 2 analog signals into digital signals10 Proface GP000-IS11-O. 4 inch screen protective cover (1 pieces)One end is a loose wire, which is used to carry out RS-232C connection between the host and LT.COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connectorLT4000M (module type analog), PNP output, DC24V (host).12.1 inches, replaced by a host of backlight (1).For connecting GP operation data with D-Sub RS-232C and power /DIO terminals Proface GP000-IS11-O. For multi connection communication, length: 5 meters.Touch panel operation for RGB input modules (Master - from: Mini-B)The nut for mounting the display module (10 / set) GP000-IS11-O Proface. Used to display analog RGB (2 channels) on the GP3000Extension cable for connecting USB (Mini-B) interface to front panel.The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port GP000-IS11-O Proface. The main controller is connected to the man-machine interface for MPI communication12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, wateer droplets, dust and oil pollution (5 / set) GP000-IS11-O Proface GP000-IS11-O. 5.7 inches, installed to provide the function of dust and moistureUsed for surface protection of man-machine interface from oil and chemical pollution (5 / set)) Proface GP000-IS11-O. Used to connect the 2-Port adapter to GP4000Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.