LK Automation Limited LK Automation Limited
Brand: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Go Back >> Product Catalogues
RS-232C GP2000H adapter GP2000H-AP232 Proface GP2000H-AP232
Brand: Proface
Name: RS-232C GP2000H adapter
Model: GP2000H-AP232
For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.

5.7 inches, installed to provide the function of dust and moistureDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.USB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set).Extension cable for connecting USB (Type-A) interface to front panel Proface GP2000H-AP232. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function GP2000H-AP232 (1)The main controller is connected to the man-machine interface for MPI communicationMounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Extended cable for connecting USB (Type-A) (LT) interface.10.4 inch TFT models applicable parts, for the 10 Proface GP2000H-AP232. 4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories.AUX connector for external output (5 / set).For the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.One end is a loose wire, which is used to carry out RS-485 connection between the host and LT Proface GP2000H-AP232. LT seal on the control panel.Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors GP2000H-AP232 Proface.
Length: 3 meters. Cable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex) GP2000H-AP232 Proface. 5 / setsUsed to connect the 2-Port adapter to GP4000COM1 pin adapter, which is used to connect the communication components that are dedicated to thhe COM2 interface to the COM1 interface of the man-machine interface GP2000H-AP232 Proface GP2000H-AP232. Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thicknesss of the mounting panel 2mm gasket (1 pieces) Proface GP2000H-AP232. Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface


...More relevant models >>>>