When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)Used to install the human machine interface to the fixed panel (2 / cover).LT4000M (module type DIO), NPN output, DC24V (host).10.4 inches and above, used to connect the power cord (5 / set).For 5 Proface PFXZCDOP151. 7 inch models, prevent cable loose from the USB cable fastening clip (5 / set) PFXZCDOP151GP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panel4.3 Inch Touch Screen anti UV protective film (1 pieces).When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10 Proface PFXZCDOP151. 4 inch GP2500 (TFT) in the installation of the required accessories.I/O expansion module, including the 8 point relay /1 public endScreen protection cover (1 pieces) for protecting screen against pollution of man-machine interface12 way 4 digital signals into analog signals and output resultsFor 3.8 inch models, connect the connector to the DIO interface Proface PFXZCDOP151. For connecting external I/O devices. (5 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceConnector for connecting DC power cord. (linear, 5 / set)Data transmission cable between host and LT series. Length: 5 meters.2 / setsTouch screen anti ultraviolet protective film (1 pieces).Some types of PLC are not connected. Length: 5 meters.256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Used to install the human machine interface to the fixed panel (2 / cover) PFXZCDOP151. COM1 interface with the cable for direct connection to the CPU series PLC QCOM1 interface with the cable (RS-232C), used to connect directly to the Q series connection mmodule (or other host)For the operation screen (5 pieces) (GP3000H standard) PFXZCDOP151. COM1 interface with the cable for direct connection to the CPU series PLC A