LK Automation Limited
Proface GP450-ZB21 T-Link module
Brand:
Proface
Name: T-Link module
Model: GP450-ZB21
Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).
...More relevant models >>>>
Name: T-Link module
Model: GP450-ZB21
Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).
7.0/7.5 inch screen protective cover (1 pieces)COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceApply to GLC-2600/2500Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 10 meters Proface GP450-ZB21. Standard cable for connecting GP3000H adapter and GP3000H.
Length: 3 meters GP450-ZB21 Cable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex).Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceUsed to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block Proface GP450-ZB21. COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)Some types of PLC are not connected. Length: 5 meters.Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable. (5 / set)Replaceable anti fouling film for protecting screen protective film (5 sheets / cover) Proface GP450-ZB21. USB cable clamp for preventing disconnection of connection (5 / set)To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)The installation of accessories, adjust the size of the GP-411xT panel with the same size of the GP-410xG/W, easy to replace.Touch screen anti ultraviolet protective film (1 pieces).SD memory card (4GB, MLC, CLASS4).5.7 inches, GP installed to the hard panel to provide dust and moisture proof function.For 5.7 inch models, for fixing the hooks of the three EX modules.One end is a loose wire, which is used to carrry out RS-232C connection between the host and LT GP450-ZB21. Converting 2 analog signals into digital signalsThe main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail GP450-ZB21.
Length of 10 meters Proface GP450-ZB21. Standard cable for connecting GP3000H adapter and GP3000H.
Length: 3 meters GP450-ZB21 Cable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex).Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceUsed to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block Proface GP450-ZB21. COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)Some types of PLC are not connected. Length: 5 meters.Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable. (5 / set)Replaceable anti fouling film for protecting screen protective film (5 sheets / cover) Proface GP450-ZB21. USB cable clamp for preventing disconnection of connection (5 / set)To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)The installation of accessories, adjust the size of the GP-411xT panel with the same size of the GP-410xG/W, easy to replace.Touch screen anti ultraviolet protective film (1 pieces).SD memory card (4GB, MLC, CLASS4).5.7 inches, GP installed to the hard panel to provide dust and moisture proof function.For 5.7 inch models, for fixing the hooks of the three EX modules.One end is a loose wire, which is used to carrry out RS-232C connection between the host and LT GP450-ZB21. Converting 2 analog signals into digital signalsThe main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail GP450-ZB21.
...More relevant models >>>>