Disposable supplies used to protect the screen from the pollution of the man-machine interface film (5 sheets / sets)Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters).12.1 inches, replaced by a host of backlight (1).Used to connect the SIEMENS S5 PLC series to the host computer interfaceTouch screen anti ultraviolet protective film (1 pieces) Proface GP2000H-C232-10M GP2000H-C232-10M COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connection15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joints C and D different.7.4 inches, installed to provide the function of dust and moistureConnect to PC, transfer screen data and user programs Proface GP2000H-C232-10M. Used in a variety of host and man-machine interface for RS-232C connectionDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.7.4 inches, replace the backlight (1 / set)Used for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave joint10.4 inch screen protective cover (1 pieces)A1/A2/B+ DIO Type connector (compression type) (5 / set)Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2For 5 Proface GP2000H-C232-10M. 7 inch models, for fixing the hooks of the three EX modules.Used to display analog RGB (2 channels) on the GP3000Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters. 4.3 Inch Touch Screen anti UV protective film (1 pieces).The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module GP2000H-C232-10M. Portable GP2000H series models accessories, RS-232 single head cable (3 m).For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the samee time, the programmer) length: 5 meters GP2000H-C232-10M. For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)