COM2 terminal adapter for communication through the RS-422/485 connectionAdapter for EX module (5 / set)For the man-machine interface hanging in the neck lanyard.7.0/7.5 inch screen protective cover (1 pieces)Memory for extending EX GP-Pro alarm and character table functions.12 way 4 digital signals into analog signals and output resultsConverting SIO to RS-422 terminal blockFor the elastic display module installation nut wrench (1 / set) Proface CA6-DIOCNALL-01 CA6-DIOCNALL-01 The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters).For the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters Proface CA6-DIOCNALL-01. GP4000 series back mounted model of waterproof rubber gasket. (1)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) Proface CA6-DIOCNALL-01. COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)For RGB input USB cable to prevent disconnection (2 / set)10.4 inches or more, for the film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)I/O module, including 32 point NPN/PNP input10.4 inches and above, used to connect the power cord (5 / set).LT4000M (module type DDIO), NPN output, DC24V (host) CA6-DIOCNALL-01. GP2500S use256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.12.1 inch screen protective cover (1 pieces)Disposable film ((5 sheets / sets) for protecting screen against contamination of human computer interface12 way 2 digital signals into analog signals and output results