COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceDurable interface cable for connecting GP with external devices (such as the main controller), equipped with a universal filter.When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces) Proface CA6-CBLTTY/5M-01. GLC2300 is not available7 CA6-CBLTTY/5M-014 inches, installed to provide the function of dust and moistureTouch screen anti ultraviolet protective film (1 pieces).The main controller is connected to the man-machine interface for MPI communication12 way 4 digital signals into analog signals and output resultsTouch screen anti ultraviolet protective film (1 pieces) Proface CA6-CBLTTY/5M-01. 3 / setsDirect interface Matsushita Electric PLC FP series CPU port.A1/A2/B+ DIO Type connector (compression type) (5 / set)2GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connection5.7 inches, installed to provide the function of dust and moistureUsed in a variety of host and man-machine interface for RS-232C connectionInput / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputUsed in a variety of host and man-machine interface for RS-422 connectionConnector for connecting DC power cord Proface CA6-CBLTTY/5M-01. (right angle, 5 / set)15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joints C and D different.Transmission screen data, such as the USB cable, PC (Type-A USB) to the man-mmachine interface USB (Type-A)To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)Used for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave jointGP2500S useSuitablle for A/B+ Type modelsFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters CA6-CBLTTY/5M-01 CA6-CBLTTY/5M-01.