Used to prevent disconnection of the connection (1 interface, 5 / set).15 inches, replaced by a host of backlight (1).A veneer, for the GP4000 series back loading models of full flush (white, 1)Portable GP2000H series models accessories, RS-232 single head cable (3 m).USB cable to prevent disconnection of the fastening clip (5 / set)Used to display analog RGB (2 channels) on the GP30007 Proface CA3-WPG12-01 CA3-WPG12-01 4 inches, installed to provide the function of dust and moistureFor connecting GP operation data with D-Sub RS-232C and power /DIO terminals.Used to connect the 2-Port adapter to GP4000Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters).CFast cards (32GB, SLC,) inserted in the CFast slot for storage Proface CA3-WPG12-01. Used to install the man-machine interface to the fixed panel. (4 / set)10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).5.7 inches, replace the backlight (1 / set)Replaceable anti fouling film for protecting screen protective film (5 sheets / cover).2 / setsFor connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block Proface CA3-WPG12-01. For RGB input USB cable to prevent disconnection (2 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceCOM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface.GP3000H replacement label (55 sheets / set)Touch panel operation for RGB input modules (Master - from: Mini-B)Used to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block CA3-WPG12-01. Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine CA3-WPG12-01. Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.