Memory for extending EX GP-Pro alarm and character table functions.10.4 inches (TFT), the replacement of the host backlight (1).To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)Cable for connecting GP3000 to various modulesMounting screws (4 sets) to be fitted to the hard panel at the interface of the machine Proface CA3-CBLCBT422-01. Converting SIO to RS-422 terminal blockGP3000H portable sling4 CA3-CBLCBT422-013 Inch Touch Screen anti UV protective film (1 pieces).12.1 inches, replaced by a host of backlight (1).Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters).The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port Proface CA3-CBLCBT422-01. For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters).When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces) Proface CA3-CBLCBT422-01. The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port.Clock battery, save system date and time when power is off.CFast cards (32GB, SLC,) inserted in the CFast slot for storage.For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.GP4000 series back mounted model of waterproof rubber gasket. (1)Interface module for the simultaneous use of A/QnA/FX series external controllerTouch screen anti uultraviolet protective film (1 pieces) CA3-CBLCBT422-01. NETWORK FLEX 64 point DIO connector terminal block, (including 2)The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.For 3.8 inch models, preventt cable loose from the USB cable fastening clip (5 / set) CA3-CBLCBT422-01. Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2