Colorful LED switch with USB interface.Used to prevent disconnection. (1 interface, 5 / set)Connect to PC, transfer screen data and user programs.One end is a loose wire, which is used to carry out RS-232C connection between the host and LT.For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block PSM-CONV00 Proface PSM-CONV00 Adapter for converting an audio output portion of a AUX adapter into a Jack Pin socket.Durable interface cable for connecting GP with external devices (such as the main controller), equipped with a universal filter.Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters) PSM-CONV00 Proface. Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Length: 5 meters.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceUsed to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface).CFast cards (32GB, SLC,) inserted in the CFast slot for storage PSM-CONV00 Proface. Used to connect the 2-Port adapter to GP4000Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master station3 / setsThe main controller is connected to the man-machine interface for MPI communication10.4 inches (TFT), the replacement of the host backlight (1).Touch screen anti ultraviolet protective film (1 pieces).For multi connection communication, length: 5 meters.Adapter for EX module (5 / set)Connector for connecting DC power cord. (right angle, 5 / set)Used in a variety of host and man-machine interface for RS-422 connectionDisposable batttery (1 blocks) for backing up clock data PSM-CONV00. 10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).Some types of PLC are not connected. Length: 5 metters PSM-CONV00. 512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.