For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.Touch panel operation for RGB input modules (Master - from: Mini-B)1-0 DVI standard (DVI-D 24 pin convex connector)Disposable battery (1 blocks) for backing up clock data.Input / output hybrid I/O modules, including 32 point NPN/PNP input and 32 point NPN transistor output5 Proface PS400-WP00-MS. 7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Adapter for converting an audio output portion of a AUX adapter into a Jack Pin socket PS400-WP00-MSFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters Proface PS400-WP00-MS. 5 / sets12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function.10.4 inch screen protective cover (1 pieces)Adapter for EX module (5 / set)Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 3 meters. The MITSUBISHI Q series PLC is connected to GP, length: 5 m Proface PS400-WP00-MS. Touch screen anti ultraviolet protective film (1 pieces).USB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set).256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.The main controller is connected to the man-machine interface of the host, for MPI communication5 / sets4.3 Inch Touch Screen anti UV protective film (1 pieces).The PC adapter for PCMCIA slot read CF card required.Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters. Used in aa variety of host and man-machine interface for RS-422 connectionPortable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters) PS400-WP00-MS. Used for surface protection of man-machine interface from oil and chemical polluttion (5 / set) PS400-WP00-MS. The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication.