12 way 4 digital signals into analog signals and output resultsMounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Length: 5 meters.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.3 / setsInterface module for the simultaneous use of A/QnA/FX series external controllerA1/A2/B+ DIO Type connector (welding type) (5 / set)5 / setsFor the man-machine interface hanging in the neck lanyard Proface PFXZGMNT1 PFXZGMNT1 Used to install the GP3000H series to a commercially available support arm or panel.Input / output hybrid I/O modules, including 32 point NPN/PNP input and 32 point NPN transistor outputLT seal on the control panel.5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set) Proface PFXZGMNT1. LT4000M (module type DIO), PNP output, DC24V (host).Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 10 meters. Used to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface) Proface PFXZGMNT1. Connector for connecting a serial port (1)Connector for connecting DC power cord (5)Used to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block PFXZGMNT1 Proface. Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters).Transmission screen data of the USB cable, PC (Type-A USB) to the man-machine interface USB (Mini-B) PFXZGMNT1 Proface. LT fasteners installed on the control panel (4 / set)LT4000M (module type DIO), NPN output, DC24V (host).7.4 inches, replace the backlight (1 / set)Screen pprotection cover (1 pieces) for protecting screen against pollution of man-machine interfaceAdapter for EX module (5 / set)Cable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commeercial display device (24- DVI-D pin convex) PFXZGMNT1 Proface Proface PFXZGMNT1 PFXZGMNT1. Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.