7.4 inches or larger, FLEX NETWORK GLC2300 connector (5 groups)For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.GP4000 series back mounted model of waterproof rubber gasket. (1)3.4 Inch Touch Screen anti UV protective film (1 pieces) Proface PFXZCFWG32. Suitable for LT4000M/GP4000M series modules, 3.5 inch.Connect to USB printer (Type-B) PFXZCFWG32When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)3 / sets12 way 4 digital signals into analog signals and output resultsUsed to convert RGB to DVI-AThe man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port Proface PFXZCFWG32. Expansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master communicationTransmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)For thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Used for surface protection of man-machine interface from oil and chemical pollution (5 / set) Proface PFXZCFWG32. The man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port.A veneer, for the GP4000 series back loading models of full flush (white, 1)For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters.Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Engineering documents created by the LT interface too download images and logic programming software through the USB interface PFXZCFWG32. GP3000H portable slingWith the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)7.4 inches, installed to pprovide the function of dust and moistureFor 5 PFXZCFWG32. 7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)