For 5.7 inch models, for fixing the hooks of the three EX modules.One end is a loose wire, which is used to carry out RS-485 connection between the host and LT.Touch screen anti ultraviolet protective film (1 pieces).Connector for connecting a serial port (1)Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)The MITSUBISHI A series PLC is connected to GP, length: 5 m Proface PFXZCFUV41 PFXZCFUV41 Touch screen anti ultraviolet protective film (1 pieces).Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Engineering documents created by the LT interface to download images and logic programming software through the USB interface Proface PFXZCFUV41. 5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Adapter for EX module (5 / set)Used to display analog RGB (2 channels) on the GP3000Used to install the human machine interface to the fixed panel (2 / cover).Touch screen anti ultraviolet protective film (1 pieces).Used to prevent disconnection of the connection (1 interface, 5 / set) Proface PFXZCFUV41. 7.5 inches, GP installed to the hard panel to provide dust and moisture proof function.Clock battery, save system date and time when power is off.B/B+/C FLEX NETWORK Type connector (5)Suitable for A/B+ Type modelsConnect to PC, transfer screen data and user programs.Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationThe man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port. PFXZCFUV41. I/O expansion module, including the 8 point relay /1 public endConnect to PC, transfer screen data and user programs.Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters).For connecting GP operation daata with RS-422 and power /DIO terminals PFXZCFUV41. For 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)