A veneer, for the GP4000 series back loading models of full flush (white, 1)Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters).Data transmission cable between host and LT series. Length: 5 meters.The three color tower lamp installed on the fixed panel is connected with the human machine interface through the USB interface Proface PFXZCCEUKB1. COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface PFXZCCEUKB1512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.12 way 4 digital signals into analog signals and output resultsCable for connecting GP3000 to various modules2GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface PFXZCCEUKB1. Length: 5 meters.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceFor 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set) Proface PFXZCCEUKB1. For thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)Used for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave jointDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface PFXZCCEUKB1 Proface PFXZCCEUKB1 Proface. Used for surface protection of man-machine interface from oil and chemical pollution (5 / set).128MB, for the implementation of the picture save, log and data backup and other dataa management operations, such as compression flash memory card PFXZCCEUKB1 Proface PFXZCCEUKB1. The MITSUBISHI Q series PLC is connected to GP, length: 5 m.I/O module, including 32 point NPN/PNP inputUsed to install the human machine interfaace to the fixed panel (2 / cover) Proface PFXZCCEUKB1. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)