LK Automation Limited
OMRON H3CR-H Series Solid-state Power OFF-delay Timers
Brand:
OMRON
Name: Solid-state Power OFF-delay Timers
Model: H3CR-H Series
DIN 48 X 48-mm Power OFF-delay Timer.
Long power OFF-delay times;
S-series: up to 12 seconds,
M-series: up to 12 minutes.
Models with forced-reset input are available.
11-pin and 8-pin models are available.
...More relevant models >>>>
Name: Solid-state Power OFF-delay Timers
Model: H3CR-H Series
DIN 48 X 48-mm Power OFF-delay Timer.
Long power OFF-delay times;
S-series: up to 12 seconds,
M-series: up to 12 minutes.
Models with forced-reset input are available.
11-pin and 8-pin models are available.
Input type: DC voltage/current.
Supply voltage: 24 VAC/VDC.
Comparative Output Model: 2 relay contact outputs (SPST-NO).
Highly Visible LCD Display with 2-color,
(Red and Green) LEDs.
Multi-range DC voltage/current input.
Front-panel key operation for easy setting.
Average processing function suppresses flicker OMRON H3CR-H Series.
Scaling, front-panel forced-zero, zero-limit functions.
Easy confirmation of max/min display H3CR-H Series
Short 80-mm depth (measured from edge of face plate).
Finger protective cover (standard equipment) guards against electric shock.
Water- and dust-proof NEMA4X (IP66 equivalent) front panel.
Recognized to U.S. and Canadian requirements under the Component,
Recognition Program of UL OMRON H3CR-H Series.
CE marking. Input type: NPN/ voltage pulse input type.
Event input terminal 5 points (S-TMR, HOLD, RESET) is equipped with.
External power 80mA DC12V.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input.
Communication: RS-485; NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
Digital rotating pulse meter with high speed measurement for 50kHz OMRON H3CR-H Series.
Action determine the color, can switch the green / Red 2 kinds of color display.
Measurement of 50kHz high speed pulse.
Can rotate the encoder and a variety of ON/OFF pulse signal, up to 50Weekly Control with a Large Time Display,
Easy Programming with Large Display and Interactive,
Functions.
Easy operation with five keys.
Up to 24 steps of ON/OFF operations can be set.
Power supply freely selectable from 100 to 240 VAC.
Memory protection during power failure for up to 10 years.
Certified for UL and CSA safety standards.
The same setting can be used for multiple-day operation and,
timer operation. Input type: Rotary pulse.
Supply voltage: 24 VAC/VDC.
Output: 2 relay contact outputs (SPST-NO).
Highly Visible LCD Display with 2-color (Red and Green) LEDs.
Contact, NPN, PNP, or voltage pulse input.
Front-panel key operation for easy setting.
Average processing function suppresses flicker.
Includes scaling, auto-zero time, startup compensation time functions.
Easyy confirmation of max/min display H3CR-H Series.
Short 80-mm depth (measured from edge of face plate).
Finger protective cover (standard equipment) guards against electric shock.
Water- and dust-proof NEMA4X (IP66 equivalent) front panel.
Recognnized to U H3CR-H Series. S. and Canadian requirements under the Compo,
nent Recognition Program of UL.
CE marking.
Built-in external power supply (12 VDC, 40 mA).
Supply voltage: 24 VAC/VDC.
Comparative Output Model: 2 relay contact outputs (SPST-NO).
Highly Visible LCD Display with 2-color,
(Red and Green) LEDs.
Multi-range DC voltage/current input.
Front-panel key operation for easy setting.
Average processing function suppresses flicker OMRON H3CR-H Series.
Scaling, front-panel forced-zero, zero-limit functions.
Easy confirmation of max/min display H3CR-H Series
Short 80-mm depth (measured from edge of face plate).
Finger protective cover (standard equipment) guards against electric shock.
Water- and dust-proof NEMA4X (IP66 equivalent) front panel.
Recognized to U.S. and Canadian requirements under the Component,
Recognition Program of UL OMRON H3CR-H Series.
CE marking. Input type: NPN/ voltage pulse input type.
Event input terminal 5 points (S-TMR, HOLD, RESET) is equipped with.
External power 80mA DC12V.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input.
Communication: RS-485; NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
Digital rotating pulse meter with high speed measurement for 50kHz OMRON H3CR-H Series.
Action determine the color, can switch the green / Red 2 kinds of color display.
Measurement of 50kHz high speed pulse.
Can rotate the encoder and a variety of ON/OFF pulse signal, up to 50Weekly Control with a Large Time Display,
Easy Programming with Large Display and Interactive,
Functions.
Easy operation with five keys.
Up to 24 steps of ON/OFF operations can be set.
Power supply freely selectable from 100 to 240 VAC.
Memory protection during power failure for up to 10 years.
Certified for UL and CSA safety standards.
The same setting can be used for multiple-day operation and,
timer operation. Input type: Rotary pulse.
Supply voltage: 24 VAC/VDC.
Output: 2 relay contact outputs (SPST-NO).
Highly Visible LCD Display with 2-color (Red and Green) LEDs.
Contact, NPN, PNP, or voltage pulse input.
Front-panel key operation for easy setting.
Average processing function suppresses flicker.
Includes scaling, auto-zero time, startup compensation time functions.
Easyy confirmation of max/min display H3CR-H Series.
Short 80-mm depth (measured from edge of face plate).
Finger protective cover (standard equipment) guards against electric shock.
Water- and dust-proof NEMA4X (IP66 equivalent) front panel.
Recognnized to U H3CR-H Series. S. and Canadian requirements under the Compo,
nent Recognition Program of UL.
CE marking.
Built-in external power supply (12 VDC, 40 mA).
...More relevant models >>>>