LK Automation Limited
OMRON E2G-M18KS07-M1-D1 Cylindrical proximity sensor
Brand:
OMRON
Name: Cylindrical proximity sensor
Model: E2G-M18KS07-M1-D1
High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC two-wire / connector type.
Polarity: there.
Shape: shield, M18.
Detection range: 7mm.
Action mode: NO.
...More relevant models >>>>
Name: Cylindrical proximity sensor
Model: E2G-M18KS07-M1-D1
High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC two-wire / connector type.
Polarity: there.
Shape: shield, M18.
Detection range: 7mm.
Action mode: NO.
Size: M8, Shielded.
Sensing distance: 2.0 mm.
Connection: M8 connector (3-pin).
Body material: Stainless steel.
Thread length (overall length): 27 (39).
Output configuration: NPN.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor OMRON E2G-M18KS07-M1-D1.
Problems such as the collision of workpieces are eliminated E2G-M18KS07-M1-D1
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / connector type OMRON E2G-M18KS07-M1-D1.
Shape: non shield, M8.
Detection range: 2mm.
Output configuration: PNP.
Action mode: NC. A communication gateway that connects smart sensors to CompoNet.
High speed intelligent sensor measurement data collection at PLC or PT.
Only need to connect the communication cable can start.
Trigger measurement and acquisition of the decision result, and a control signal line with no need of wiring OMRON E2G-M18KS07-M1-D1. Sensing method: Through-beam type (with slot).
Sensing distance: 5 mm (slot width).
Output type: NPN output.
Output configuration: Light-ON.
Photomicrosensor with light,
modulation for reduced external,
light interference and a,
connector for easy maintenance.
Built-in connectors.
Select from four easy-to-use shapes for efficient space,
utilization.
Connectors with locks for safety against vibration.
Convenient mounting method using M3 screws.
Wide operating voltage range: 5 to 24 VDC. Field of view: Wide View (Short-distance).
Number of pixels: 350,000 pixels.
Monochrome: PNP.
Field of view/Installation distance: Refer to figure 4 on p E2G-M18KS07-M1-D1. 20.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models withoutt the,
need as in vision system for a separate controller E2G-M18KS07-M1-D1.
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series.
Sensing distance: 2.0 mm.
Connection: M8 connector (3-pin).
Body material: Stainless steel.
Thread length (overall length): 27 (39).
Output configuration: NPN.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor OMRON E2G-M18KS07-M1-D1.
Problems such as the collision of workpieces are eliminated E2G-M18KS07-M1-D1
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / connector type OMRON E2G-M18KS07-M1-D1.
Shape: non shield, M8.
Detection range: 2mm.
Output configuration: PNP.
Action mode: NC. A communication gateway that connects smart sensors to CompoNet.
High speed intelligent sensor measurement data collection at PLC or PT.
Only need to connect the communication cable can start.
Trigger measurement and acquisition of the decision result, and a control signal line with no need of wiring OMRON E2G-M18KS07-M1-D1. Sensing method: Through-beam type (with slot).
Sensing distance: 5 mm (slot width).
Output type: NPN output.
Output configuration: Light-ON.
Photomicrosensor with light,
modulation for reduced external,
light interference and a,
connector for easy maintenance.
Built-in connectors.
Select from four easy-to-use shapes for efficient space,
utilization.
Connectors with locks for safety against vibration.
Convenient mounting method using M3 screws.
Wide operating voltage range: 5 to 24 VDC. Field of view: Wide View (Short-distance).
Number of pixels: 350,000 pixels.
Monochrome: PNP.
Field of view/Installation distance: Refer to figure 4 on p E2G-M18KS07-M1-D1. 20.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models withoutt the,
need as in vision system for a separate controller E2G-M18KS07-M1-D1.
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series.
...More relevant models >>>>
Related download