LK Automation Limited
NE1A-SCPU01-EIP | OMRON Safety Network Controller NE1A-SCPU01-EIP
Brand:
OMRON
Name: Safety Network Controller
Model: NE1A-SCPU01-EIP
Name: Safety Network Controller.
No. of I/O points: Safety inputs, 16; Test outputs. 4; Safety outputs, 8.
Unit version: 1.1.
Directly Connected to SYSMAC.
CS/CJ Series via EtherNet/IP.
Monitors safety systems via EtherNet/IP.
Equipped with master functions of CIP Safety on DeviceNet.
Does not require external devices for connecting.
Safety Network Controller and EtherNet/IP.
Increased maintainability in combination with,
OMRON’s EtherNet/IP compatible PLC.
ISO13849-1 (PLe) and IEC 61508 SIL3 certification.
...More relevant models >>>>
Name: Safety Network Controller
Model: NE1A-SCPU01-EIP
Name: Safety Network Controller.
No. of I/O points: Safety inputs, 16; Test outputs. 4; Safety outputs, 8.
Unit version: 1.1.
Directly Connected to SYSMAC.
CS/CJ Series via EtherNet/IP.
Monitors safety systems via EtherNet/IP.
Equipped with master functions of CIP Safety on DeviceNet.
Does not require external devices for connecting.
Safety Network Controller and EtherNet/IP.
Increased maintainability in combination with,
OMRON’s EtherNet/IP compatible PLC.
ISO13849-1 (PLe) and IEC 61508 SIL3 certification.
Actuator: Plastic rod.
Conduit size: 1-conduit; G1/2.
Built-in switch mechanism: 3NC (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available OMRON NE1A-SCPU01-EIP. )
M12-connector models are also available, saving on labor and,
simplifying replacement NE1A-SCPU01-EIP
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Direction of Operation Key insertion: Vertical OMRON NE1A-SCPU01-EIP.
Cable length: 5 m.
2NC (Slow-action).
Slim Safety Door Switches with IP67 Rating.
Slim design with a width of only 17 mm.
(three-contact models).
Reversible design allowing either front or rear mounting.
Built-in Switches with two- or three-terminal contact.
construction are available.
Operation Key with rubber mounting hole to absorb vibration and shock.
IP67 degree of protection. Description: OS32C with side location cable entry OMRON NE1A-SCPU01-EIP.
Max. Operating Range (Safety Zone): 4m.
Remarks: CD-ROM (Configuration tool) OS supported: Windows 2000,
Windows XP (32-bit version, Service Pack 3 or later),
Windows Vista (32-bit version), Windows 7 (32-bit version/64-bit version),
For configuration tool version, refer to page 23 NE1A-SCPU01-EIP OMRON.
Compact (104.5 mm), lightweight (1.3 kg),
and easy-to-install Safety Laser Scanner NE1A-SCPU01-EIP OMRON.
Provides a safety circuit of PLd/Safety Category 3 (ISO13849-1) without a,
dedicated controller.
Type 3 Safety Laser Scanner complies with IEC61496-1/-3.
70 sets of safety zone and warning zone combinations are available,
supporting complicated changes in working environments NE1A-SCPU01-EIP OMRON.
A safety radius up to 4 m and warning zone(s) radius up to 15 m can be set NE1A-SCPU01-EIP.
The minimum object resolution can be changed to 30, 40, 50 or 70 mm.
The response time is configurable from 80 ms to a maximum of 680 ms.
Reference Boundary Monitooring function prevents unauthorized changes in,
the scanner position OMRON NE1A-SCPU01-EIP.
Minimal down time, sensor block can be replaced without the need to reprogram.
Conduit size: 1-conduit; G1/2.
Built-in switch mechanism: 3NC (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available OMRON NE1A-SCPU01-EIP. )
M12-connector models are also available, saving on labor and,
simplifying replacement NE1A-SCPU01-EIP
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Direction of Operation Key insertion: Vertical OMRON NE1A-SCPU01-EIP.
Cable length: 5 m.
2NC (Slow-action).
Slim Safety Door Switches with IP67 Rating.
Slim design with a width of only 17 mm.
(three-contact models).
Reversible design allowing either front or rear mounting.
Built-in Switches with two- or three-terminal contact.
construction are available.
Operation Key with rubber mounting hole to absorb vibration and shock.
IP67 degree of protection. Description: OS32C with side location cable entry OMRON NE1A-SCPU01-EIP.
Max. Operating Range (Safety Zone): 4m.
Remarks: CD-ROM (Configuration tool) OS supported: Windows 2000,
Windows XP (32-bit version, Service Pack 3 or later),
Windows Vista (32-bit version), Windows 7 (32-bit version/64-bit version),
For configuration tool version, refer to page 23 NE1A-SCPU01-EIP OMRON.
Compact (104.5 mm), lightweight (1.3 kg),
and easy-to-install Safety Laser Scanner NE1A-SCPU01-EIP OMRON.
Provides a safety circuit of PLd/Safety Category 3 (ISO13849-1) without a,
dedicated controller.
Type 3 Safety Laser Scanner complies with IEC61496-1/-3.
70 sets of safety zone and warning zone combinations are available,
supporting complicated changes in working environments NE1A-SCPU01-EIP OMRON.
A safety radius up to 4 m and warning zone(s) radius up to 15 m can be set NE1A-SCPU01-EIP.
The minimum object resolution can be changed to 30, 40, 50 or 70 mm.
The response time is configurable from 80 ms to a maximum of 680 ms.
Reference Boundary Monitooring function prevents unauthorized changes in,
the scanner position OMRON NE1A-SCPU01-EIP.
Minimal down time, sensor block can be replaced without the need to reprogram.
...More relevant models >>>>