LK Automation Limited
MR-J4-DU30KB-RJ Servo driver MITSUBISHI MR-J4-DU30KB-RJ
Brand:
MITSUBISHI
Name: Servo driver
Model: MR-J4-DU30KB-RJ
Drive unit.
MITSUBISHI universal AC servo amplifier MELSERVO-J4 series.
Rated output: 30kw.
Interface: SSCNET III /H.
Power supply: three phase AC200V.
Special specifications: full closed control 4 wire / support mechanical end encoder ABZ phase input / support positioning mode.
Support position control, speed control, torque control.
Position control to follow the position instructions.
When the control is inserted, the position control is performed.
Speed control follows the speed command to control the speed within a certain range.
Torque control to follow the torque command to control the stable torque.
Function of switching amplitude. The increase in the process of switching and stopping,
And in the operation of the use of the switching signal, switching growth.
...More relevant models >>>>
Name: Servo driver
Model: MR-J4-DU30KB-RJ
Drive unit.
MITSUBISHI universal AC servo amplifier MELSERVO-J4 series.
Rated output: 30kw.
Interface: SSCNET III /H.
Power supply: three phase AC200V.
Special specifications: full closed control 4 wire / support mechanical end encoder ABZ phase input / support positioning mode.
Support position control, speed control, torque control.
Position control to follow the position instructions.
When the control is inserted, the position control is performed.
Speed control follows the speed command to control the speed within a certain range.
Torque control to follow the torque command to control the stable torque.
Function of switching amplitude. The increase in the process of switching and stopping,
And in the operation of the use of the switching signal, switching growth.
Motor: HA-SH type.
Power: 3.5kw.
Speed: 3000r/min.
The speed regulating motor can be divided into a constant speed motor, a stepless constant speed motor, a stepless speed changing motor and a stepless speed changing motor,
Can also be divided into electromagnetic induction motor, DC motor, PWM variable frequency motor and switched reluctance motor MITSUBISHI MR-J4-DU30KB-RJ.
The rotor speed of the induction motor is always slightly lower than that of the rotating magnetic field MR-J4-DU30KB-RJ
The rotor speed of the synchronous motor is not independent of the load size, but is always maintained as a synchronous speed. "MITSUBISHI general purpose AC servo amplifier MELSERVO-J2-Super series.
Rated output: 3.5kw.
SSCNET interface.
Voltage: 3 phase AC400V MITSUBISHI MR-J4-DU30KB-RJ.
Complete synchronization system with SSCNET high speed serial communication,
The communication cycle between the controller and the servo amplifier is the longest 0.888ms.
Such systems will be able to provide high reliability and high performance.
When connecting the servo system with SSCNET,
In the motion system, the parameters of the servo amplifier and the acquisition of the data will be displayed on the motion controller MITSUBISHI MR-J4-DU30KB-RJ.
Connect a dedicated cable with an amplifier and a controller to form a SSCNET system.
This simple connection method reduces the routing time and helps to prevent noise.
Even in the MELSERVO-J2-SUPER series products using high resolution coding standards, the command frequency is no limit MR-J4-DU30KB-RJ MITSUBISHI.
It is only necessary to add a battery on the servo amplifier, which can form the absolute value system MR-J4-DU30KB-RJ MITSUBISHI.
Currently there are more than 1000000 high reliability SSCNET servo amplifier networks in use. "Type: MR-C type.
Symbol 10A for motor models: HC-PQ43.
Power supply voltage: single phase AC100V.
Drive: servo drive in the development of the premise of the frequency conversion technology,
Current loop in the drive,
Speed loop and position loop (frequency converter without the ring) have carried out a more precise control than the general frequency control technology and algorithm,
In function is also a lot stronger than tthe traditional servo,
The main point can be precise position control MR-J4-DU30KB-RJ MITSUBISHI MR-J4-DU30KB-RJ.
The control speed and position are controlled by the pulse sequence transmitted by the upper controller,
The internal algorrithm of the driver and the faster and more accurate calculation and better performance of electronic devices to make it more superior to the inverter MITSUBISHI MR-J4-DU30KB-RJ.
Power: 3.5kw.
Speed: 3000r/min.
The speed regulating motor can be divided into a constant speed motor, a stepless constant speed motor, a stepless speed changing motor and a stepless speed changing motor,
Can also be divided into electromagnetic induction motor, DC motor, PWM variable frequency motor and switched reluctance motor MITSUBISHI MR-J4-DU30KB-RJ.
The rotor speed of the induction motor is always slightly lower than that of the rotating magnetic field MR-J4-DU30KB-RJ
The rotor speed of the synchronous motor is not independent of the load size, but is always maintained as a synchronous speed. "MITSUBISHI general purpose AC servo amplifier MELSERVO-J2-Super series.
Rated output: 3.5kw.
SSCNET interface.
Voltage: 3 phase AC400V MITSUBISHI MR-J4-DU30KB-RJ.
Complete synchronization system with SSCNET high speed serial communication,
The communication cycle between the controller and the servo amplifier is the longest 0.888ms.
Such systems will be able to provide high reliability and high performance.
When connecting the servo system with SSCNET,
In the motion system, the parameters of the servo amplifier and the acquisition of the data will be displayed on the motion controller MITSUBISHI MR-J4-DU30KB-RJ.
Connect a dedicated cable with an amplifier and a controller to form a SSCNET system.
This simple connection method reduces the routing time and helps to prevent noise.
Even in the MELSERVO-J2-SUPER series products using high resolution coding standards, the command frequency is no limit MR-J4-DU30KB-RJ MITSUBISHI.
It is only necessary to add a battery on the servo amplifier, which can form the absolute value system MR-J4-DU30KB-RJ MITSUBISHI.
Currently there are more than 1000000 high reliability SSCNET servo amplifier networks in use. "Type: MR-C type.
Symbol 10A for motor models: HC-PQ43.
Power supply voltage: single phase AC100V.
Drive: servo drive in the development of the premise of the frequency conversion technology,
Current loop in the drive,
Speed loop and position loop (frequency converter without the ring) have carried out a more precise control than the general frequency control technology and algorithm,
In function is also a lot stronger than tthe traditional servo,
The main point can be precise position control MR-J4-DU30KB-RJ MITSUBISHI MR-J4-DU30KB-RJ.
The control speed and position are controlled by the pulse sequence transmitted by the upper controller,
The internal algorrithm of the driver and the faster and more accurate calculation and better performance of electronic devices to make it more superior to the inverter MITSUBISHI MR-J4-DU30KB-RJ.
...More relevant models >>>>