LK Automation Limited
MITSUBISHI GT1455-QTBDE 5.7 Inch Touch Screen
Brand:
MITSUBISHI
Name: 5.7 Inch Touch Screen
Model: GT1455-QTBDE
Series introduction: with a variety of first type functions and communication interface standard model.
Screen size: 5.7 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: QVGA (320 x 240).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
With a built-in Ethernet communication interface.
Standard model with various pre - and communication interface.
User storage capacity: 9MB.
Device USB interface.
Standard Ethernet, RS-422/485 and RS-232 interface.
The standard SD card interface.
According to the working principle of the touch screen and the transmission of information of the media, the touch screen is divided into four kinds,
They are resistive, capacitive, inductive, infrared, and surface acoustic waves.
Each touch screen has its own advantages and disadvantages, to understand which kind of touch screen to apply to what kind of occasion,
The key is to understand the working principle and characteristics of each type of touch screen technology.
...More relevant models >>>>
Name: 5.7 Inch Touch Screen
Model: GT1455-QTBDE
Series introduction: with a variety of first type functions and communication interface standard model.
Screen size: 5.7 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: QVGA (320 x 240).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
With a built-in Ethernet communication interface.
Standard model with various pre - and communication interface.
User storage capacity: 9MB.
Device USB interface.
Standard Ethernet, RS-422/485 and RS-232 interface.
The standard SD card interface.
According to the working principle of the touch screen and the transmission of information of the media, the touch screen is divided into four kinds,
They are resistive, capacitive, inductive, infrared, and surface acoustic waves.
Each touch screen has its own advantages and disadvantages, to understand which kind of touch screen to apply to what kind of occasion,
The key is to understand the working principle and characteristics of each type of touch screen technology.
Series: multimedia and advanced features and features of a variety of high-performance models.
Screen size: 8.4 inches.
Display color: 256 color or more color.
Installation type: compatible with multimedia and video /RGB.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle) MITSUBISHI GT1455-QTBDE.
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422 GT1455-QTBDE
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities).
User storage capacity: 15MB (GT16__-VNB__:11MB).
With HOST USB and device USB port.
Standard Ethernet, RS-422/485 and RS-232 ports.
Support multimedia and video /RGB units MITSUBISHI GT1455-QTBDE.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface MITSUBISHI GT1455-QTBDE.
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must,, or use dry cloth touch screen on the surface of the water GT1455-QTBDE.
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the conneection of the control box and the touch screen connected to the connector or the touch screen,
Users as long as the direction of the re exchange of it GT1455-QTBDE.
Screen size: 8.4 inches.
Display color: 256 color or more color.
Installation type: compatible with multimedia and video /RGB.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle) MITSUBISHI GT1455-QTBDE.
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422 GT1455-QTBDE
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities).
User storage capacity: 15MB (GT16__-VNB__:11MB).
With HOST USB and device USB port.
Standard Ethernet, RS-422/485 and RS-232 ports.
Support multimedia and video /RGB units MITSUBISHI GT1455-QTBDE.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface MITSUBISHI GT1455-QTBDE.
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must,, or use dry cloth touch screen on the surface of the water GT1455-QTBDE.
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the conneection of the control box and the touch screen connected to the connector or the touch screen,
Users as long as the direction of the re exchange of it GT1455-QTBDE.
...More relevant models >>>>