LK Automation Limited LK Automation Limited
Brand: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Go Back >> Product Catalogues
LY2-CR | OMRON Bi-power Relays LY2-CR
Brand: OMRON
Name: Bi-power Relays
Model: LY2-CR
Structure: Relays with Plug-in Terminals.
Classification: Models with CR circuits for coil surge absorption,
(AC coil specification only).
Number of poles: 2.
Power-switching Compact.
General-purpose Relays.
The standard models include models that are,
compliant with the UL, CSA, and SEV safety.
standards and with the Electrical Appliances and,
Material Safety Act.
Equipped with an arc barrier for arc interruption.
Withstand voltages up to 2,000 V.
New built-in diode and built-in CR circuit models have,
joined the series.
The lineup also includes models that are compliant,
with the LR and VDE safety standards.
Single-pole and double-pole models have AC4,
ratings and DC2 ratings (operating coil ratings:
100/110 VAC, 110/120 VAC, 200/220 VAC, 220/240 VAC,
and 100/110 VDC).
Three-pole and four-pole models have AC4 ratings,
and DC2 ratings (operating coil ratings: 100/110,
VAC, 200/220 VAC and 100/110 VDC).

Classification: Standard models.
Rated voltage: Standard products, 100/110 or 200/220 VAC, 24 or 100/110 VDC;
Made-to-order items, 110/120 VAC, 12 or 48 VDC.
New Latching Levers for Circuit Checking.
Added to Our Best-selling.
MY General-purpose Relays.
Now lead-free to protect the environment OMRON LY2-CR.
VDE certification (Germany).
Different colors of coil tape for AC and,
DC models to more easily distinguish them LY2-CR
MY(S) models with latching levers added for,
easier circuit checking. Isolation: Phototriac coupler.
Zero cross function: Yes.
Indicator: Yes.
Rated output load: 30 A at 200 to 480 VAC.
Rated input voltage: 12 to 24 VDC.
Extremely Thin Relays Integrated with Heat Sinks.
Downsizing achieved through optimum design of heat sink OMRON LY2-CR.
Mounting possible via screws or via DIN track.
Close mounting possible for linking terminals.
(Except for G3PA-260B-VD and G3PA-450B-VD-2.)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Comply with VDE 0160 (finger protection),
with a dielectric strength of 4,000 V between input and load.
Certified by UL, CSA, and VDE (reinforced insulation) OMRON LY2-CR. Terminal (wire connection): Push-In Plus Terminal.
Applicable output load: DC load.
Zero cross function: --.
Rated input voltage: AC/DC 48V.
Global standard size,
low profile slim I/O relay with width 6 LY2-CR OMRON. 2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel LY2-CR OMRON.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.).
No scrrew loosening means maintenance-free application,
realizing high reliability LY2-CR.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires LY2-CR OMRON.
Screw terminal is also stocked to meet the screw type needs OMRON LY2-CR.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange.


...More relevant models >>>>
Last one: OMRON LY4-D
next one: OMRON LY2Z-CR