LK Automation Limited LK Automation Limited
Brand: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Go Back >> Product Catalogues
LD75D1-CM | MITSUBISHI Positioning module LD75D1-CM
Brand: MITSUBISHI
Name: Positioning module
Model: LD75D1-CM
Differential output.
Axis of control: 1.
Maximum output pulse: pulse/s 4M.
Location data: 600 data / axis.
Max link distance: 10m.
Start is also simple.
Digital oscilloscope function.
Data collection and data collection in a simple motion controller that is synchronized with the control period.
Waveform display, you can improve the efficiency of the start.
The use of steps in accordance with the auxiliary function can be.
Can be set by different uses of the probe, easy to view the data set.
Can be on the word 16CH, bit 16CH data sampling.
Among them, the word 8CH, bit 8CH data can be displayed in real time.
Monitoring and testing function
Through a wealth of monitoring and testing functions, you can simply start and action check.
Can only choose the necessary items from the rich monitoring information and monitor the display.
Through the test function, do not have to control procedures can also be implemented to confirm the basic action.

Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output.Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output.Convert connector to screw relay terminal.
2 wire connection, no need to use common terminal MITSUBISHI LD75D1-CM.
Negative common end use. Convert connectors to fast connectors.
According to the location of the connection equipment distribution module LD75D1-CM Convert connectors to fast connectors.
According to the location of the connection equipment distribution module. Can be isolated to obtain DC24/48/100V, AC100/200V input signal."Universal output function: leakage type.
Program capacity: 20K step.
Basic operations processing speed: 40ns MITSUBISHI LD75D1-CM.
Communication interface: USB/Ethernet.
Control mode: stored procedure repeated operation.
Input / output points: 1024 points.
End cap.
CPU built-in functions can be easily set through programming tools.
The built-in I/O function settings can be easily carried out through the parameters of the programming tool.
5 s units can be used for high precision workpiece measurement in pulse measurement mode,
Can be used with a minimum of 5 s units of the input signal of the ON/OFF time (the shortest 200 s) for high precision measurement MITSUBISHI LD75D1-CM.
For example, after measuring the ON time of the sensor input,
The "moving speed" and "length" of the workpiece can be accurately calculated " LD75D1-CM MITSUBISHI.
High precision PWM control of the highest 200kHz.
In the PWM output mode, by setting the ON time and cycle time,
The duty cycle can be changed, and the minimum cycle time is 5 s LD75D1-CM MITSUBISHI.
In addition to lighting dimming control, simple motor control and heater control,
Can also be used to require high resolution detection equipment, such as a wide range of oscillators. "Convert connector to screw relay terminal LD75D1-CM MITSUBISHI.
2 wire connection, no need to use common terminal.
Positive common end use. Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output.Thermocouple input.
Number of input channels: 4ch.
Detection function of broken wire with heater.
Standard control.
Heating and cooling control.
Self tuning function.
Peak current suppression.
Heating function at the same time.
Sampling period switching function.
Temperature input mode.
Temperature regulation mode.
To reduce operating costs by saving energy
Peak current suppression
After the peak current suppression function is used, the number of the upper limit output limit of each channel can be changed automatically,
Split transistor output time. To suppress the peak current.
Restrain the peak current to achieve energy saving effect (reducing the power supply capacity of the equipment, saving the electricity contract), and reduce the operation cost.
Achieve average temperature control
Warming function at the same time
By making the arrival time of the multi loop consistent, uniform temperature control function.
It can control temperature uniform, to ensure that the control object no local burning or thermal expansion.
No idle running, with energy saving effect, can reduce operating costs.
To achieve high stability temperature control
Standard control / heating, cooling control.
The device ussed for the temperature control of the temperature control of the extrusion molding machine can prevent over heating and cooling LD75D1-CM.
According to the object device can choose any one of the following control method.
Standard controol (heating or cooling) MITSUBISHI LD75D1-CM.
Heating, cooling control (heating and cooling).
Hybrid control (combination of standard control and heating, cooling control).


...More relevant models >>>>