Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceB/B+/C FLEX NETWORK Type connector (5)Data transmission cable between host and LT series. Length: 5 meters.The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail Proface HTB1C0DM9LP. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function HTB1C0DM9LP (1)Direct interface Matsushita Electric PLC FP series CPU port.Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 5 meters. Touch screen anti ultraviolet protective film (1 pieces) Proface HTB1C0DM9LP. Touch screen anti ultraviolet protective film (1 pieces).Backup battery for time and data backup (1).AUX connector for external output (5 / set).The main controller is connected to the man-machine interface for MPI communicationUsed to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface).With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models Proface HTB1C0DM9LP. (2 / set)128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card HTB1C0DM9LP Proface. Touch screen anti ultraviolet protective film (1 pieces).Touch screen anti ultraviolet protective film (1 pieces).Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceThe man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port HTB1C0DM9LP Proface. 100 HTB1C0DM9LP. 4 inches or larger, when installed to provide the function of dust and moistureTouch panel operation for RGB input modules (Master - from: Mini-B)Extended cable for connecting USB (Type-A) (LT) interface HTB1C0DM9LP Proface. Foor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters Proface HTB1C0DM9LP. GLC2300 is not available