LK Automation Limited
HA-LFS6014 | MITSUBISHI Low inertia medium power motor HA-LFS6014
Brand:
MITSUBISHI
Name: Low inertia medium power motor
Model: HA-LFS6014
Motor series: low inertia, medium power.
Rated output power: 6.0kw.
Rated speed: 1000r/min.
Whether to take the brake: No.
Shaft end: Standard (straight).
Voltage: 400V type.
Protection level: IP65 (IP67).
Features: low inertia from low speed to high speed, three modes can be selected, suitable for different application range. As a standard port, 30KW or greater power is suitable for flange (type) installation and support foot mounting.
Application example: injection molding machine, semiconductor manufacturing equipment, large conveyor machinery.
High resolution encoder 131072p/rev (17 bit).
The encoder with high resolution ensures excellent performance and stability at low speed.
All motor dimensions are the same as before and all are compatible with the wiring.
...More relevant models >>>>
Name: Low inertia medium power motor
Model: HA-LFS6014
Motor series: low inertia, medium power.
Rated output power: 6.0kw.
Rated speed: 1000r/min.
Whether to take the brake: No.
Shaft end: Standard (straight).
Voltage: 400V type.
Protection level: IP65 (IP67).
Features: low inertia from low speed to high speed, three modes can be selected, suitable for different application range. As a standard port, 30KW or greater power is suitable for flange (type) installation and support foot mounting.
Application example: injection molding machine, semiconductor manufacturing equipment, large conveyor machinery.
High resolution encoder 131072p/rev (17 bit).
The encoder with high resolution ensures excellent performance and stability at low speed.
All motor dimensions are the same as before and all are compatible with the wiring.
Servo motor series: medium inertia, small capacity.
Rated output: 3.5kw.
Rated speed: 2000r/min.
Electromagnetic brake: incidental.
Oil seal: incidental (Note 1, note 2, note 3).
Power supply: 200V.
Note 1 through HG-KR and HG-MR series 0.1kW and HG-SR series can be supported.
Note 2 with the speed reducer case, do not configure the oil seal MITSUBISHI HA-LFS6014.
Note 3 with oil seal HG-KR, HG-MR series servo motor''s appearance size standard is different HA-LFS6014
Stable driving of medium capacity and medium inertia type products.
Through the optimization of structural design, to achieve the minimum length of the industry.
High speed & high torque. Shorten the positioning time, achieve high-speed equipment.
Reducing the electric torque ripple MITSUBISHI HA-LFS6014.
Through the combination of the optimal number of the motor and the slot number, the torque ripple is greatly reduced,
To further realize the smooth constant speed device.
Improve the environmental performance of HG-SR, HG-JR series of products using IP67. Type: MR-J_B series.
Rated output: 0.2KW.
Interface: standard.
Servo system according to the system structure can be divided into open loop servo system, closed loop servo system, semi closed loop system, compound control system MITSUBISHI HA-LFS6014.
The closed loop automatic control system with feedback is composed of a position detecting part, a deviation amplifying part, an executing part and a controlled object HA-LFS6014 MITSUBISHI.
Servo system must have good controllability, high stability and high adaptability.
Note that the control of the signal is good after the disappearance of the signal, can immediately stop the turn;
High stability is the torque with the increase of speed and uniform decline; adaptability is fast, sensitive, and ring state quality is good HA-LFS6014 MITSUBISHI.
According to the types of servo drives are classified, there are three kinds of electric, hydraulic or electric hydraulic HA-LFS6014 MITSUBISHI.
If the servo system is divided according to the function, then theere is a measuring servo and power servo system;
Analog servo and power servo system; position servo and acceleration servo system HA-LFS6014.
The electric servo system can be divided into two categories: DC DC servo system and AC AC servvo system based on the electrical signals MITSUBISHI HA-LFS6014.
AC AC servo system also has two kinds of asynchronous motor servo system and synchronous motor servo system.
Rated output: 3.5kw.
Rated speed: 2000r/min.
Electromagnetic brake: incidental.
Oil seal: incidental (Note 1, note 2, note 3).
Power supply: 200V.
Note 1 through HG-KR and HG-MR series 0.1kW and HG-SR series can be supported.
Note 2 with the speed reducer case, do not configure the oil seal MITSUBISHI HA-LFS6014.
Note 3 with oil seal HG-KR, HG-MR series servo motor''s appearance size standard is different HA-LFS6014
Stable driving of medium capacity and medium inertia type products.
Through the optimization of structural design, to achieve the minimum length of the industry.
High speed & high torque. Shorten the positioning time, achieve high-speed equipment.
Reducing the electric torque ripple MITSUBISHI HA-LFS6014.
Through the combination of the optimal number of the motor and the slot number, the torque ripple is greatly reduced,
To further realize the smooth constant speed device.
Improve the environmental performance of HG-SR, HG-JR series of products using IP67. Type: MR-J_B series.
Rated output: 0.2KW.
Interface: standard.
Servo system according to the system structure can be divided into open loop servo system, closed loop servo system, semi closed loop system, compound control system MITSUBISHI HA-LFS6014.
The closed loop automatic control system with feedback is composed of a position detecting part, a deviation amplifying part, an executing part and a controlled object HA-LFS6014 MITSUBISHI.
Servo system must have good controllability, high stability and high adaptability.
Note that the control of the signal is good after the disappearance of the signal, can immediately stop the turn;
High stability is the torque with the increase of speed and uniform decline; adaptability is fast, sensitive, and ring state quality is good HA-LFS6014 MITSUBISHI.
According to the types of servo drives are classified, there are three kinds of electric, hydraulic or electric hydraulic HA-LFS6014 MITSUBISHI.
If the servo system is divided according to the function, then theere is a measuring servo and power servo system;
Analog servo and power servo system; position servo and acceleration servo system HA-LFS6014.
The electric servo system can be divided into two categories: DC DC servo system and AC AC servvo system based on the electrical signals MITSUBISHI HA-LFS6014.
AC AC servo system also has two kinds of asynchronous motor servo system and synchronous motor servo system.
...More relevant models >>>>