LK Automation Limited
H8BM-R Series | OMRON Multi-maintenance Counter/Timer H8BM-R Series
Brand:
OMRON
Name: Multi-maintenance Counter/Timer
Model: H8BM-R Series
Nine Built-in Counters/Timers to.
Measure Equipment Operating.
Cycles and Times and Forecast.
Maintenance Timing.
Provides up to nine counters or accumulative timers.
(Counter and timer functions can be used at the same time.)
Individual forecast outputs to indicate maintenance timing.
Pre-forecast display and machine stoppage output provided.
IP54 oil-proof type at setting area for resistance to oil and water.
Separate digit keys to easily change settings.
Compact, short-body: 72 × 72 × 79 mm (DIN).
Key protection function prevents incorrect operation.
Multiple outputs: NPN/PNP.
Directly connectable to 2-wire DC sensors.
Complies with UL and CSA.
...More relevant models >>>>
Name: Multi-maintenance Counter/Timer
Model: H8BM-R Series
Nine Built-in Counters/Timers to.
Measure Equipment Operating.
Cycles and Times and Forecast.
Maintenance Timing.
Provides up to nine counters or accumulative timers.
(Counter and timer functions can be used at the same time.)
Individual forecast outputs to indicate maintenance timing.
Pre-forecast display and machine stoppage output provided.
IP54 oil-proof type at setting area for resistance to oil and water.
Separate digit keys to easily change settings.
Compact, short-body: 72 × 72 × 79 mm (DIN).
Key protection function prevents incorrect operation.
Multiple outputs: NPN/PNP.
Directly connectable to 2-wire DC sensors.
Complies with UL and CSA.
Large Setting Dial and Moving Pointers Ideal,
for Easy Operation and Monitoring.
Incorporating an easy-to-see large setting dial with moving pointers.
Wide time-setting range of 0.2 s to 60 h.
(available through three time-range model types).
Wide AC power supply range (100 to 240 VAC).
IP65 watertight and dust-tight front panel OMRON H8BM-R Series.
Approved by UL and CSA.
Conforms to EN61812-1 and IEC60664-1 H8BM-R Series
4 kV for Low Voltage, and EMC Directives.
Conforms to EMC standards.
Six-language instruction manual provided.
Programmable contact enables the building of a self-holding,
relay circuit as well as built-in instantaneous contact. (-NS).
Memory retention (-NSR).
Finger protection terminal block OMRON H8BM-R Series.
Enables easy sequence checks through instantaneous outputs.
for a zero set value at any time range. Category: external supply 100mA DC10V.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
Communication: RS-485; NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V OMRON H8BM-R Series.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified.
Action determine the color, can switch the green / Red 2 kinds of color display H8BM-R Series OMRON.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event inputSupply voltage: 24 VAC; 12, 24 VDC H8BM-R Series OMRON.
Time-limit contact: DPST-NO.
Short-time range model (0.1 s to 10 min).
Compact, Multi-function Timers,
for G2R Relay Socket.
The Push-In Plus Terminal Block Socket-compatible H3RN-@-B.
Timers in a black design join the Compact, Multi-function H3RN Timers.
Standard multiple time ranges and multiple operating modes H8BM-R Series OMRON.
UL listed.
Conforms to CSA and CE Markking H8BM-R Series. Supply voltage: 24 VAC; 12, 24 VDC.
Time-limit contact: SPDT.
Short-time range model (0.1 s to 10 min).
Ultra-slim Timer for G2R Relay Socket.
Pin configuration compatible with G2R Relay and mounts to the,
P2R/P2RF Soccket OMRON H8BM-R Series.
Standard multiple time ranges and multiple operating modes.
Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Volt,
age, and EMC Directives.
for Easy Operation and Monitoring.
Incorporating an easy-to-see large setting dial with moving pointers.
Wide time-setting range of 0.2 s to 60 h.
(available through three time-range model types).
Wide AC power supply range (100 to 240 VAC).
IP65 watertight and dust-tight front panel OMRON H8BM-R Series.
Approved by UL and CSA.
Conforms to EN61812-1 and IEC60664-1 H8BM-R Series
4 kV for Low Voltage, and EMC Directives.
Conforms to EMC standards.
Six-language instruction manual provided.
Programmable contact enables the building of a self-holding,
relay circuit as well as built-in instantaneous contact. (-NS).
Memory retention (-NSR).
Finger protection terminal block OMRON H8BM-R Series.
Enables easy sequence checks through instantaneous outputs.
for a zero set value at any time range. Category: external supply 100mA DC10V.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
Communication: RS-485; NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V OMRON H8BM-R Series.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified.
Action determine the color, can switch the green / Red 2 kinds of color display H8BM-R Series OMRON.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event inputSupply voltage: 24 VAC; 12, 24 VDC H8BM-R Series OMRON.
Time-limit contact: DPST-NO.
Short-time range model (0.1 s to 10 min).
Compact, Multi-function Timers,
for G2R Relay Socket.
The Push-In Plus Terminal Block Socket-compatible H3RN-@-B.
Timers in a black design join the Compact, Multi-function H3RN Timers.
Standard multiple time ranges and multiple operating modes H8BM-R Series OMRON.
UL listed.
Conforms to CSA and CE Markking H8BM-R Series. Supply voltage: 24 VAC; 12, 24 VDC.
Time-limit contact: SPDT.
Short-time range model (0.1 s to 10 min).
Ultra-slim Timer for G2R Relay Socket.
Pin configuration compatible with G2R Relay and mounts to the,
P2R/P2RF Soccket OMRON H8BM-R Series.
Standard multiple time ranges and multiple operating modes.
Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Volt,
age, and EMC Directives.
...More relevant models >>>>