COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface.The nut for mounting the display module (10 / set).The PC adapter for PCMCIA slot read CF card required.The man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port Proface GP3000H-CBLSD422-3M. A connector that connects the DIO interface for connecting an external I/O device (5 sets) GP3000H-CBLSD422-3MCable for connecting GP3000 to various modulesA veneer, for the GP4000 series back loading models of full flush (white, 1)Used to install the human machine interface to the fixed panel (2 / cover).10.4 inches and above, used to connect the power cord (5 / set) Proface GP3000H-CBLSD422-3M. Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.7.4 inches, replace the backlight (1 / set)Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters).COM1 interface with the cable for direct connection to the CPU series PLC ACOM2 adapter for converting the COM2 interface to the RS-422 terminal blockApply to GLC-2600/250010 Proface GP3000H-CBLSD422-3M. 4 inches or more, for the film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)5 GP3000H-CBLSD422-3M Proface. 7 inches, GP installed to the hard panel to provide dust and moisture proof function.Video-Mix module (32000 color, video input x 4 channel, analog RGB input x 1 channel, analog RGB output x 1 channel, VGA/SVGA)For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters GP3000H-CBLSD422-3M Proface. Used in a variety off host and man-machine interface for RS-422 connectionAdapter for EX module (5 / set)Converting 2 analog signals into digital signalsSome types of PLC are not connected GP3000H-CBLSD422-3M Proface GP3000H-CBLSD422-3M. Length: 5 meters.Backuup battery for time and data backup (1) Proface GP3000H-CBLSD422-3M. Length: 5 meters.One end is a loose wire, which is used to carry out RS-232C connection between the host and LT.