LK Automation Limited LK Automation Limited
Brand: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Go Back >> Product Catalogues
GP3000H soft belt joint type straight cable GP3000H-CBLSD-10M Proface GP3000H-CBLSD-10M
Brand: Proface
Name: GP3000H soft belt joint type straight cable
Model: GP3000H-CBLSD-10M
Standard cable for connecting GP3000H adapter and GP3000H.
Length: 10 meters.

5 / setsLT seal on the control panel.Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).I/O module, including 32 point NPN/PNP inputTouch screen anti ultraviolet protective film (1 pieces) Proface GP3000H-CBLSD-10M. Connect to USB printer (Type-B).Used to install the GP3000H series to a commercially available support arm or panel GP3000H-CBLSD-10M7.0/7.5 inch screen protective cover (1 pieces)USB cable to prevent disconnection of the fastening clip (5 / set)12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).7.4 inches or larger, for external reset input, NETWORK FLEX communication, audio output Proface GP3000H-CBLSD-10M. AUX connector, L typeWhen the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Adapter for EX module (5 / set)7.5 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).The module is used for mounting on the back board of the GLC2000 series host computer Proface GP3000H-CBLSD-10M. Then you can install the GP77R series or GLC100 series of medium size expansion module in the module on the outward side.Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters) GP3000H-CBLSD-10M Proface. The main controller is connected to the man-machine interface for MPI communicationGP2500S useUsed to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block GP3000H-CBLSD-10M Proface. Portable GP2000H series models accessories, RS-422 single head cable (10 m).7.5 innches /3 GP3000H-CBLSD-10M. 8 inches /5.7 inches, used to connect the power cord (5 / sets).For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Etherneet: Jack RJ-45 (Modular), other: terminal block GP3000H-CBLSD-10M Proface Proface GP3000H-CBLSD-10M. Standard cable for connecting GP3000H adapter and GP3000H.
Length: 3 meters.


...More relevant models >>>>