13 pin input connectors for HTB and 16 pin output connectors. (1 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceWith a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set) FN-X32TS41 Proface. The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication FN-X32TS41Connect to PC, transfer screen data and user programs.The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.Used to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block FN-X32TS41 Proface. Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters).512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Connector for connecting DC power cord (5)Input / output hybrid I/O modules, including 32 point NPN/PNP input and 32 point NPN transistor outputStandard interface cable for connecting GP and external devices (such as the main controller), with a universal filter FN-X32TS41 Proface.
Length of 5 meters. Cable for connecting GP3000 to various modulesUsed to connect the 2-Port adapter to GP4000Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.2 / setsWith the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)Support CANopen from the sttation module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output FN-X32TS41. Up to 7 EX modules can be connected.A1/A2/B+ DIO Type connector (compression type) (5 / set)Connector for connecting DC power cord. (linnear, 5 / set)3 FN-X32TS41. 8 inches, GP installed to the hard panel to provide dust and moisture proof function.The nut for mounting the display module (10 / set).