LK Automation Limited
E2F Series | OMRON Resin-case Proximity Sensor E2F Series
Brand:
OMRON
Name: Resin-case Proximity Sensor
Model: E2F Series
Proximity Sensor with Resin Case,
with Superb Water Resistance.
IP68 protection.
Mutual interference prevention with models with different,
frequencies is also available.
...More relevant models >>>>
Name: Resin-case Proximity Sensor
Model: E2F Series
Proximity Sensor with Resin Case,
with Superb Water Resistance.
IP68 protection.
Mutual interference prevention with models with different,
frequencies is also available.
E32-D14LR type: standard type; soft (new standard),
Specialty: 6 cylinder side,
Bending radius (mm): R; R1.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsFree change detection direction.
Detection direction can be according to the front, side (up and down, around 90 units) change OMRON E2F Series.
Can be similar to the feeling of a limit switch installation E2F Series
Type: detection of variable terminal plate / DC type.
Shape: shield.
Detection distance: 20mm.
Output form: NO PNP + NC (dual output). Appearance: Shielded, M30.
Sensing distance: 8 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor OMRON E2F Series.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available. Sensing method: Through beam (Emitter + Receiver).
Connection method: Pre-wired (2 m).
Sensing distance: 15m.
Model: NPN output .
Stainless Steel Housing Ideal for Food Industry PAT Pending.
Strong resistance against detergents, disinfectants, and jet liquid flow OMRON E2F Series.
Product lineup includes BGS Reflective Models and Through-beam,
Models with built-in slits.
Certified by Ecolab Europe. Fitting materials: Iron, zinc plating.
Count: 1 E2F Series OMRON.
Accessories: Description, --; Material, --; Count, --.
Applicable sensor (mounting pitch on sensor side): E3JM (40).
Page: Dimensions, 7. Appearance: Shielded, M30 E2F Series OMRON.
Sensing distance: 12 mm.
Output configuration: DC 2-wire (polarity).
Operation mode: NO.
Proximity Sensor Ideal for the Food and Beverage Industry. Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years E2F Series OMRON.
Powerr turning to easily set the optimum light level E2F Series.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even ffor low-reflective objects and large objects OMRON E2F Series.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit.
Specialty: 6 cylinder side,
Bending radius (mm): R; R1.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsFree change detection direction.
Detection direction can be according to the front, side (up and down, around 90 units) change OMRON E2F Series.
Can be similar to the feeling of a limit switch installation E2F Series
Type: detection of variable terminal plate / DC type.
Shape: shield.
Detection distance: 20mm.
Output form: NO PNP + NC (dual output). Appearance: Shielded, M30.
Sensing distance: 8 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor OMRON E2F Series.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available. Sensing method: Through beam (Emitter + Receiver).
Connection method: Pre-wired (2 m).
Sensing distance: 15m.
Model: NPN output .
Stainless Steel Housing Ideal for Food Industry PAT Pending.
Strong resistance against detergents, disinfectants, and jet liquid flow OMRON E2F Series.
Product lineup includes BGS Reflective Models and Through-beam,
Models with built-in slits.
Certified by Ecolab Europe. Fitting materials: Iron, zinc plating.
Count: 1 E2F Series OMRON.
Accessories: Description, --; Material, --; Count, --.
Applicable sensor (mounting pitch on sensor side): E3JM (40).
Page: Dimensions, 7. Appearance: Shielded, M30 E2F Series OMRON.
Sensing distance: 12 mm.
Output configuration: DC 2-wire (polarity).
Operation mode: NO.
Proximity Sensor Ideal for the Food and Beverage Industry. Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years E2F Series OMRON.
Powerr turning to easily set the optimum light level E2F Series.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even ffor low-reflective objects and large objects OMRON E2F Series.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit.
...More relevant models >>>>