LK Automation Limited
E2EM-X4X1 2M | OMRON Long-distance Proximity Sensor E2EM-X4X1 2M
Brand:
OMRON
Name: Long-distance Proximity Sensor
Model: E2EM-X4X1 2M
Appearance: Shielded, M12.
Sensing distance: 4 mm.
Model: NO.
Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
with reduced problems due to workpiece collisions.
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature.
...More relevant models >>>>
Name: Long-distance Proximity Sensor
Model: E2EM-X4X1 2M
Appearance: Shielded, M12.
Sensing distance: 4 mm.
Model: NO.
Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
with reduced problems due to workpiece collisions.
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature.
Sensor type: Through-beam.
Sensing distance: 15 m.
Connection method: pre-wired.
Model: NPN output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications OMRON E2EM-X4X1 2M.
Non-stop detection.
High quality and reliability.
High EMC protection E2EM-X4X1 2M
High light immunity.
Robust and waterproof housing. E3JM-R4M4T detection method: Regression reflection type with M.S.R. function,
Connection: terminal plate,
Detection range: 4m.
Output status: ON into the light; light shading ON; switch conversion type.
Output: relay. Function: timer,
2 types of cost reductionTo achieve a compact Sensor Head and high-resolution measurements,
the ZW Series uses a white light confocal principle to detect objects OMRON E2EM-X4X1 2M.
This principle is described below. Connection method: Pre-wired connector.
Cable length: 0.5 m.
Sensing distance: 600 ± 400 mm.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments OMRON E2EM-X4X1 2M.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.Power supply voltage: DC.
Sensing method: Retro-reflective without MSR function E2EM-X4X1 2M OMRON.
Sensing distance: 11 m[100 mm](When using E39-R2).
Output configu ration: PNP.
Long-distance Photoelectric Sensor E2EM-X4X1 2M OMRON.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Imprroved visibility:
A red LED that makes the spot visible E2EM-X4X1 2M OMRON E2EM-X4X1 2M.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectaable power supply input (24 to 240 VDC, 24 to 240 VAC) OMRON E2EM-X4X1 2M.
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
Sensing distance: 15 m.
Connection method: pre-wired.
Model: NPN output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications OMRON E2EM-X4X1 2M.
Non-stop detection.
High quality and reliability.
High EMC protection E2EM-X4X1 2M
High light immunity.
Robust and waterproof housing. E3JM-R4M4T detection method: Regression reflection type with M.S.R. function,
Connection: terminal plate,
Detection range: 4m.
Output status: ON into the light; light shading ON; switch conversion type.
Output: relay. Function: timer,
2 types of cost reductionTo achieve a compact Sensor Head and high-resolution measurements,
the ZW Series uses a white light confocal principle to detect objects OMRON E2EM-X4X1 2M.
This principle is described below. Connection method: Pre-wired connector.
Cable length: 0.5 m.
Sensing distance: 600 ± 400 mm.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments OMRON E2EM-X4X1 2M.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.Power supply voltage: DC.
Sensing method: Retro-reflective without MSR function E2EM-X4X1 2M OMRON.
Sensing distance: 11 m[100 mm](When using E39-R2).
Output configu ration: PNP.
Long-distance Photoelectric Sensor E2EM-X4X1 2M OMRON.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Imprroved visibility:
A red LED that makes the spot visible E2EM-X4X1 2M OMRON E2EM-X4X1 2M.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectaable power supply input (24 to 240 VDC, 24 to 240 VAC) OMRON E2EM-X4X1 2M.
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
...More relevant models >>>>