LK Automation Limited
E2C-EM07M-S | OMRON High Precision Positioning Inductive Proximity Sensor E2C-EM07M-S
Brand:
OMRON
Name: High Precision Positioning Inductive Proximity Sensor
Model: E2C-EM07M-S
Type: Unshielded.
Appearance: Screw, M18 × 46.3 mm.
Sensing distance: 7 mm.
Repeat accuracy: 5 μm.
Cable specification: With Protective Spiral Tube.
Proximity Sensor with Separate.
Amplifier Enables Easily Making High.
precision Sensitivity Settings.
Wide variety of Sensor Heads to select according to the,
application. Flexible cables are used between Preamplifiers,
and Amplifier Units of the Sensor Heads.
High resistance to changes in ambient temperature.
Temperature characteristics of 0.08%/°C (for 5.4-dia. models).
Make simple and reliable detection settings with micron,
level precision using the teaching function.
Check the sensing excess gain level on the digital display.
Support for high-precision positioning and screening with,
fine positioning to maximize variations.
The E2C-EDA0 supports an EtherCAT Sensor,
Communications Unit or CompoNet Sensor,
Communications Unit.
...More relevant models >>>>
Name: High Precision Positioning Inductive Proximity Sensor
Model: E2C-EM07M-S
Type: Unshielded.
Appearance: Screw, M18 × 46.3 mm.
Sensing distance: 7 mm.
Repeat accuracy: 5 μm.
Cable specification: With Protective Spiral Tube.
Proximity Sensor with Separate.
Amplifier Enables Easily Making High.
precision Sensitivity Settings.
Wide variety of Sensor Heads to select according to the,
application. Flexible cables are used between Preamplifiers,
and Amplifier Units of the Sensor Heads.
High resistance to changes in ambient temperature.
Temperature characteristics of 0.08%/°C (for 5.4-dia. models).
Make simple and reliable detection settings with micron,
level precision using the teaching function.
Check the sensing excess gain level on the digital display.
Support for high-precision positioning and screening with,
fine positioning to maximize variations.
The E2C-EDA0 supports an EtherCAT Sensor,
Communications Unit or CompoNet Sensor,
Communications Unit.
Appearance: Shielded, M30.
Sensing distance: 8 mm.
Output configuration: DC 2-wire.
Model: Operation mode, NC.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available OMRON E2C-EM07M-S. E32-T15ZR type: standard type; soft (new standard),
Specialty: plane shape side,
Shape / detection distance (mm): 270; 210; 130 (50),
Standard test object
(minimum test object) (mm) 1: 1 (0 E2C-EM07M-S005),
Fiber element for meeting diversified needsAppearance: M18.
Sensing distance: 14 mm.
Connection method: Pre-wired Models(2 m) .
Cable specifications: PVC (oil-resistant).
Polarity: Yes OMRON E2C-EM07M-S.
Operation mode : NO .
Pin arrangement: --.
Applicable connector code: --.
Your Search for Proximity Sensors.
Starts with the World-leading.
Performance and Quality of the E2E.
Standard Sensors for detecting ferrous metals.
Wide array of variations. Ideal for a variety of applications.
Models with different frequencies are also available to prevent,
mutual interference OMRON E2C-EM07M-S.
Superior environment resistance with standard cable made of oil,
resistant PVC and sensing surface made of material that resists,
cutting oil.
Useful to help prevent disconnection.
Cable protector provided as a standard feature E2C-EM07M-S OMRON. Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models) E2C-EM07M-S OMRON.
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC) E2C-EM07M-S OMRON.
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. Sensing method: Retro-reflective with MSR function.
Connection method: Standard M8 connector.
Sensing distance: 4 m(100 mm).
Model: NPN output .
The Standard for Photoelectric Sensors,
with a Secure Track Record of One,
Million Sold Yearly E2C-EM07M-S.
Long sensing distance of 30 m for Through-beam Models, 4 m for,
Retro-reflective Models, and 1 m for Diffuse-reflective Models.
Mechanical axis and optical axiss offset of less than ±2 OMRON E2C-EM07M-S. 5° simplifies,
optical axis adjustment.
High stability with unique algorithm that prevents interference of,
external light.
Sensing distance: 8 mm.
Output configuration: DC 2-wire.
Model: Operation mode, NC.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available OMRON E2C-EM07M-S. E32-T15ZR type: standard type; soft (new standard),
Specialty: plane shape side,
Shape / detection distance (mm): 270; 210; 130 (50),
Standard test object
(minimum test object) (mm) 1: 1 (0 E2C-EM07M-S005),
Fiber element for meeting diversified needsAppearance: M18.
Sensing distance: 14 mm.
Connection method: Pre-wired Models(2 m) .
Cable specifications: PVC (oil-resistant).
Polarity: Yes OMRON E2C-EM07M-S.
Operation mode : NO .
Pin arrangement: --.
Applicable connector code: --.
Your Search for Proximity Sensors.
Starts with the World-leading.
Performance and Quality of the E2E.
Standard Sensors for detecting ferrous metals.
Wide array of variations. Ideal for a variety of applications.
Models with different frequencies are also available to prevent,
mutual interference OMRON E2C-EM07M-S.
Superior environment resistance with standard cable made of oil,
resistant PVC and sensing surface made of material that resists,
cutting oil.
Useful to help prevent disconnection.
Cable protector provided as a standard feature E2C-EM07M-S OMRON. Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models) E2C-EM07M-S OMRON.
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC) E2C-EM07M-S OMRON.
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. Sensing method: Retro-reflective with MSR function.
Connection method: Standard M8 connector.
Sensing distance: 4 m(100 mm).
Model: NPN output .
The Standard for Photoelectric Sensors,
with a Secure Track Record of One,
Million Sold Yearly E2C-EM07M-S.
Long sensing distance of 30 m for Through-beam Models, 4 m for,
Retro-reflective Models, and 1 m for Diffuse-reflective Models.
Mechanical axis and optical axiss offset of less than ±2 OMRON E2C-EM07M-S. 5° simplifies,
optical axis adjustment.
High stability with unique algorithm that prevents interference of,
external light.
...More relevant models >>>>