LK Automation Limited LK Automation Limited
Brand: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Go Back >> Product Catalogues
E2C-EM02-F High Precision Positioning Inductive Proximity Sensor OMRON E2C-EM02-F
Brand: OMRON
Name: High Precision Positioning Inductive Proximity Sensor
Model: E2C-EM02-F
Type: Shielded.
Appearance: Screw, M10 × 22 mm.
Sensing distance: 2 mm.
Repeat accuracy: 2 μm.
Cable specification: Free cutting.
Proximity Sensor with Separate.
Amplifier Enables Easily Making High.
precision Sensitivity Settings.
Wide variety of Sensor Heads to select according to the,
application. Flexible cables are used between Preamplifiers,
and Amplifier Units of the Sensor Heads.
High resistance to changes in ambient temperature.
Temperature characteristics of 0.08%/°C (for 5.4-dia. models).
Make simple and reliable detection settings with micron,
level precision using the teaching function.
Check the sensing excess gain level on the digital display.
Support for high-precision positioning and screening with,
fine positioning to maximize variations.
The E2C-EDA0 supports an EtherCAT Sensor,
Communications Unit or CompoNet Sensor,
Communications Unit.

Power: DC.
Usage: slender type.
Amplifier unitE3JK-T11 for firing type,
E3JK direct current mode: mode; ON,
Miniature amplifier built-in type photoelectric switchSize: M30, Non-shielded.
Sensing distance: 30.0 mm.
Connection: Pre-wired.
Body material: Brass.
Thread length (overall length): 66 (86) OMRON E2C-EM02-F.
Output configuration: PNP.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance E2C-EM02-F
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization OMRON E2C-EM02-F. Appearance: Shielded, M30.
Sensing distance: 10 mm.
Output configuration : DC 2-wire.
Operation mode: NO.
Inductive Profoximity Sensor with.
Chemical-resistant Fluororesin Case.
Housing and mounting are made of Fluororesin resistant to chemicals.
Maximum sensing distance: 10 mm. Connection method: Pre-wired.
Cable length: 5 m.
Sensing distance: 600 ± 400 mm.
Model: NPN output.
A CMOS Laser Sensor That’s OMRON E2C-EM02-F.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications E2C-EM02-F OMRON.
Long-distance model for up to 1,000 mm. E32-D36T type: special beam type; liquid level detection,
Features: no restrictions on the diameter of the pipe is not easy to be affected by bubbles and water droplets,
Bending radius (mm): R4 E2C-EM02-F OMRON.
Fiber element for meeting diversified needsSize: M12 (brass), two - fold range, non - shielded type.
Detection range: 30mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: long thread type E2C-EM02-F OMRON.
Output type: NPN.
Action mode NO.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor E2C-EM02-F.
We have tested the product not only on the protection level (IP67) specific item,
Thee oil spray test was carried out on the condition of the work site OMRON E2C-EM02-F.
Simulation test was carried out in the environment of high oil mist concentration.


...More relevant models >>>>
Last one: OMRON E2C-EM02
next one: OMRON E2C-EM02-S