Optical system: Diffuse reflective; Regular reflective.
Measurement range: Height direction, 100±12 mm, 94±10 mm;
Width direction, 22 mm (typical).
Resolution: Height direction, 2.5 μm;
Width direction, 35 μm (22mm/631pixels).
ZG2 debut!
Achieving stable measurement.
through innovative technology OMRON E2B-M30LS15-M1-C1. Item: FZ4 Series Controllers; Standard Controllers.
Descriptions: Box-type controllers E2B-M30LS15-M1-C1
High-Grade Proc'' Items: o.
No.of cameras: 4.
Output: PNP.
Remarks: --.
Speed and accuracy determine the basic,
performance of sensing.Usability efficiently,
puts that performance to work.OMRON’s FZ,
Series of Vision Sensors represent an evolu,
tionary journey that takes these three aspects,
from the past and into the future to allow you,
to increase quality OMRON E2B-M30LS15-M1-C1. For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Power supply voltage: 12 to 24 VDC.
Output configuration: Open-collector output (PNP).
Output code: Gray.
Resolution (divisions): 256, 360, 720, 1,024.
Connection method: Pre-wired Model (1 m).
Rugged Rotary Encoder OMRON E2B-M30LS15-M1-C1.
Absolute model.
External diameter of 50 mm.
Resolution of up to 1,024 (10-bit).
IP65 (improved oil-proof protection with sealed bearings).
Optimum angle control possible in combination with PLC or,
Cam Positioner E2B-M30LS15-M1-C1 OMRON. ZX-SFW11V3 computer connected sensor function setting tool [precision monitor]Appearance: Unshielded.
Sensing surface: Top.
Sensing distance: 2 E2B-M30LS15-M1-C1 OMRON. 5 mm.
Output configuration: NPN.
Model: Operation mode, NC.
Advanced Performance and Wide.
Range of Selections in a Super.
compact Size.
Only 5.5 × 5.5 mm with a built-in Amplifier.
Maximum sensing distance: 2.5 mm. Stable detection even with,
workpiece fluctuations.
Response frequency: 1 kHz E2B-M30LS15-M1-C1 OMRON.
Low current consumption. Appearance: Standard.
Sensing method: Through beam type (with slot).
Connecting method: Connector model (4 poles).
Sensing distance: 5 mm (slot width).
Operating mode: Dark-ON/Light-ON (2 outputs).
Indicator mode: Incident light.
Model: PNP output.
Built-in connector enables,
downsizing and easier connection.
Protective circuit for safe operation.
A built-in connector minimizes the shape and dimensional,
requirements.
Two outputs: light-ON and dark-ON.
Complete lineup including seven different shapes E2B-M30LS15-M1-C1.
Safer operation with built-in power supply reverse polarity,
protection.
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator can be seen from many directions to enable,
installation in more locations OMRON E2B-M30LS15-M1-C1.
Connector with lock that mates with commercially available,
connectors.